Carb to PVC molded hose for a 69/70

Discussion in 'Street/strip 400/430/455' started by BuickV8Mike, Jan 18, 2019.

  1. BuickV8Mike

    BuickV8Mike SD Buick Fan

    Are these still availible from NAPA? I'd like to use the correct one with the clip.

    Thanks,
    Mike
     
    BuickV8Mike, Jan 18, 2019
    #1
  2. OHC JOE

    OHC JOE Mullet Mafia since 2020

    Ta has them mike
     
    OHC JOE, Jan 18, 2019
    #2
  3. BuickV8Mike

    BuickV8Mike SD Buick Fan

    Thanks Joe, is the knife work done?
     
    BuickV8Mike, Jan 18, 2019
    #3
  4. OHC JOE

    OHC JOE Mullet Mafia since 2020

    Yep
    Just kicking back now
     
    OHC JOE, Jan 18, 2019
    #4
  5. CJay

    CJay Supercar owner Staff Member

    This is the 3/8" molded hose from the carb to the PCV valve? CARS in NJ makes a really nice repro of that
     
    CJay, Jan 18, 2019
    #5
    john.schaefer77 likes this.
  6. BuickV8Mike

    BuickV8Mike SD Buick Fan

    Thanks Jason. Have you every tried to repair a slit on one? Got one on a carb I bough ft on EBay. The coolest part of the deal might be the original PCV.
     
    BuickV8Mike, Jan 18, 2019
    #6
  7. CJay

    CJay Supercar owner Staff Member

    A rubber hose with a slit in it? I don't think there's a viable repair for a cut rubber hose. The repro is cheap enough
     
    CJay, Jan 18, 2019
    #7
  8. OHC JOE

    OHC JOE Mullet Mafia since 2020

    FLEXSEAL:D
     
    OHC JOE, Jan 18, 2019
    #8
    john.schaefer77 likes this.
  9. BuickV8Mike

    BuickV8Mike SD Buick Fan

    I'm going to try gorilla glue. Here's a photo, it gets a clamp. 20190118_164452.jpg 20190112_111846.jpg
     
    BuickV8Mike, Jan 18, 2019
    #9
    OHC JOE likes this.
  10. Quick Buick

    Quick Buick Arlington Wa

    Quick Buick, Jan 18, 2019
    #10
  11. CJay

    CJay Supercar owner Staff Member

    Im thinking Big Money Mike wants to keep his car original
     
    CJay, Jan 18, 2019
    #11
    OHC JOE likes this.
  12. BuickV8Mike

    BuickV8Mike SD Buick Fan

    Big money Mike is curious how much an original 1969 PVC valve is worth? Machined from bar stock......
     
    BuickV8Mike, Jan 18, 2019
    #12
    OHC JOE likes this.

Share This Page