Hi all. I have two clocks for my 68 Riv. One with a broken clock mechanism. The other clock work, but the plastic gears that allow you to adust it is brooken. In order to make one operational I have to get of the "hands". How? Per. :beer
The ones on an old clock I had fixed just pulled off. Do this carefully, I pried them evenly under 2 sides so they go straight up. The 'seconds' hand was the hardest to get off. When you put them back on, be sure to put the minute hand on 12 and the hour hand at the center of any number, orientation is not any more critical than that. Good luck!:Smarty:
Thanks It worked!!!! One clock repaired and ready for installation. But you where right, the hand for the seconds where realy hard to get off. Thanks Joe. :beer
