Cruise control servo

Discussion in 'Parts wanted' started by Luxus, Jun 6, 2018.

  1. Luxus

    Luxus Gold Level Contributor

    Does anybody know where to get a cruise control servo for a 1974 Buick? From what I'm finding they look to be made from unobtainium.
     
  2. gsx455-4ever

    gsx455-4ever Gold Level Contributor

    I've heard Rock Auto carries rebuilt ones
     
  3. Doo Wop

    Doo Wop Where were you in '62?

  4. mrolds69

    mrolds69 Still restoring!!!

    That is a fake Chinese scam website. Notice the .XYZ url?
     
  5. Doo Wop

    Doo Wop Where were you in '62?

    I see .htm, not sure what you are talking about. I gave a link to A1 Cardone.
     
  6. 66electrafied

    66electrafied Well-Known Member

    ...And it actually works, it goes to A1 Cardone.
     
  7. Luxus

    Luxus Gold Level Contributor

    Thanks for the link Korrie, but the one I need is from the stone age. No electronics, run by vacuum. The diaphragm itself looks right though.
     
  8. Doo Wop

    Doo Wop Where were you in '62?

    I may have one from a '69. Will that work?
     
  9. Luxus

    Luxus Gold Level Contributor

    Possibly, I don't know what one from a '69 looks like. Though hopefully it should be the same. It looks like the diaphragm from your link but on the back side is just a nipple right in the center to hook a vacuum line to.
     
  10. Doo Wop

    Doo Wop Where were you in '62?

    Walter, mine is a bit different, the nipple comes out from the side. You are welcome to try it if you want. Just let me know. 003.JPG 002.JPG
     
  11. gsx455-4ever

    gsx455-4ever Gold Level Contributor

    I believe the 69 only has 2 terminals and the 74 has 3 Terminals or vice - versa
     
  12. John Stevens

    John Stevens Well-Known Member

    If your talking about the part that bolts on the inner fender with the Speedo cable running thru it. I have always heard them refered to as a transducer. I will look as I believe I may have a couple but not sure original application. I also think the third terminal is for the cruise light on the dash and wouldn't be necessary to function.
     
  13. 87GN_70GS

    87GN_70GS Well-Known Member

    I have one I took out of a big car in the 80's. I think it was mid 70's model. Also have the module
     

Share This Page