So I have a 1970 GS with a 3 speed in the floor and the consolette, which is the little half console. The thing is loose and rattling something fierce, plus I need to seal up the shifter hole, but I can't for the life of me figure out how the heck that thing comes out. Through the shifter hole, I can see the phillips head screw that's holding it down, but I can't get at it because of the top of the console. This leads me to believe that the top of the console comes off somehow, but I see no screws and I don't just want to jam a screwdriver in and start prying on a part that's likely impossible to find. Any help would be appreciated.
7/16" head nuts...lift the top up on the back and slide the top forward a little to unhook the clips on the back
Yall are awesome. Got it. Even knowing where the bolts were, it still took me a second to find them. Thanks, no more rattling console for me!