Egads

Discussion in 'The Bench' started by Harry, Jun 1, 2005.

  1. Harry

    Harry The Hammer

    I bought this rig to drive the snot out of until I can get the Buick built.
    [​IMG]
    It's got a 350 4 speed with the original 7.5 non-posi rear,I soon got tired of the mindless spinning and I installed a Powertrax to hook-up BOTH wheels.
    Being the hero I am it was straight to our local track,I eased out of the hole in time trials,spinning a little bit which was fine
    Then came first round of eliminations,I get excited,too much rpm,too much bite.
    [​IMG]
    It's fixed and going racing this weekend :Dou:

    The Buick is definitely going to need some Quality axles. :Smarty:
    TorqueRules
     
  2. custom

    custom Well-Known Member

    Harry,
    Mission accomplished. You definitely need a snot refill. :laugh:
    Good luck. :3gears:
     
  3. r0ckstarr

    r0ckstarr Well-Known Member

    Very cool car!! Got any more info on it? :TU:
     
  4. Junkman

    Junkman Well-Known Member

    If that 7.5 rear breaks again, a '75-'76 Cosworth Vega rear will bolt right in-3.73 posi gears and heavier duty carrier!
     
  5. mechacode

    mechacode Well-Known Member

    I'd drive it!
     

Share This Page