Engine block 1970 gs 350

Discussion in 'Small Block Tech' started by 70 Buick Gs, Aug 8, 2019.

  1. 70 Buick Gs

    70 Buick Gs Member

    DDE23D81-CC2D-4972-AA65-0F4B82EE80DC.jpeg E8B8DF2A-1C3F-4BEE-BA72-AF9685518961.jpeg 951B645D-AC7B-45A1-B4DC-56A24654770D.jpeg 2C9E9F3B-C72D-4D42-81D5-435A698E0656.jpeg 85AAB79C-199C-4CFD-B75A-708A04E345BB.jpeg AB3C9FE0-982A-4831-AF99-1257FD75095D.jpeg

    Attached Files:

    patwhac, Dwayne B and MrSony like this.
  2. 70 Buick Gs

    70 Buick Gs Member

    EE4ABE08-8547-4A3D-BDE5-F901BFED008B.jpeg 6DA785B9-9B4A-4C22-987B-1C973AB6EC96.jpeg 199F7F33-9EF8-4349-B36D-9BEC40DE896B.jpeg 262F29BC-E08E-41FC-9839-07705214C537.jpeg Originally what it looked like CF40739A-0B52-46C7-A476-3971D0DD1B65.jpeg
    BubbaJ, patwhac, rex362 and 1 other person like this.
  3. sean Buick 76

    sean Buick 76 Buick Nut Staff Member

    Looking very good!
  4. MrSony

    MrSony Well-Known Member

    Awesome. What color engine paint? Looks like Duplicolor DE1653 to me.
  5. MrSony

    MrSony Well-Known Member

    Neat :D
    Looks better than mine. Mine is also a '70 SP. FB_IMG_1565300774055.jpg FB_IMG_1565299341854.jpg Resized952017112795013254.jpg 20190125_152030.jpg
    patwhac and alec296 like this.
  6. 70 Buick Gs

    70 Buick Gs Member

    Yes you are correct engine colour paint Duplicolor CDE 1653
    MrSony likes this.
  7. 70 Buick Gs

    70 Buick Gs Member

    Thanks there was a lot of sand blasting and degreasing of all the nuts and bolts and parts and repainting them to be the same as factory. I like pretty much stock and original when I say original as much as possible if I can .
    MrSony likes this.
  8. Mark Demko

    Mark Demko Well-Known Member

    Nice job!!
  9. vonhef

    vonhef Well-Known Member

    It does look good!
  10. rex362

    rex362 paint clear and drive

    looking nice
  11. Fox's Den

    Fox's Den 22 years of racing the same 355 Buick motor

    The hose from thermostat to radiator works very well with the HEI. Nice fit should post that part number I am sure someone else would want to do the same if wanting to use the HEI

    The HEI is a tight fit but it will work. Very good
  12. MrSony

    MrSony Well-Known Member

    Gates 20577.
    It's installed in my 85 Regal but it's "for" a 1970 350 SB Skylark. Used the 20597 lower hose after cutting about 1.5 inches off the pump end.

Share This Page