Factory shifter conversion kit

Discussion in 'The "Juice Box"' started by dl7265, Dec 6, 2018.

  1. dl7265

    dl7265 Gold Level Contributor

  2. knucklebusted

    knucklebusted Well-Known Member

    I've used that kit and it works great. You can take the decal and use it over the factory 70-77 console.
     
    dl7265 likes this.
  3. Mr. Sunset

    Mr. Sunset Platinum Level Contributor

    A well made kit, Not for the 67, I used some of their parts for my conversion.
     
  4. Kaule

    Kaule Gold Level Contributor

    Will this work with the neutral safty switch and reversing light switch at the steering column ?
    I plan a th350 to 2004r swap, floorshifter.
     
  5. knucklebusted

    knucklebusted Well-Known Member

    You might be a pioneer in that field. I have a buddy with a Skylark that has a 455 and T200-4R in it. I don't think the backup lights work correctly or the neutral start position. I think it starts in drive or park.

    For the factory floor shift I created my own neutral start switch from a GN one by JB Welding it to the back plate of the factory one.
     
  6. jaye

    jaye Well-Known Member

    I found that kit after I purchased all the parts for my conversion TH350 to 200R4. The only part I needed is the indicator & shift plate which they said they didn't sell separately. I used all stock items however, I had to cut & weld the transmission shifter bracket to get enough offset for the cable end to clear the transmission pan. I kept the neutral safety switch & backup switch on the column. Neutral safety switch works correctly however, when I go to park the back-up lights will stay on unless I push the steering column collar to the right. I haven't tried to adjust it yet but I think it can be adjusted to work correctly.
    image2.jpeg
     

    Attached Files:

  7. BRUCE ROE

    BRUCE ROE Well-Known Member

    Nice work. Bruce Roe
     

Share This Page