finally started on the 71 post car seeing as no one wanted it started cutting it up this week :jd: ,heres some :laugh: hers trunk with tubs split and redone heres the start of the chassis work for a stock suspended car another :laugh: even though this is pic of 11.5x29.5 hoosier ,we are fitting car [have fitted] for the new 295x65 MT radial, 30x12" on 10" steel wheels with dog dish hubcaps, with room got to luv these buick wheel wells :laugh: :3gears: more to come ,frt brakes,manual steering,and rear stuff ordered, Roll cage started on today :beer bob
Nice work! Keep those pictures comming as your work continues... Whatcha gonna do with her when finished with the chassis work?
updates well didnt do anything to it today to it so heres picts of underneath excuse the mess, hopefully will fish cage next week, than find something to power it.bob
part 4 like it says heres some updates,we had some time today so put in more bars[makin it a stock susp. 25-5 car] as you can see we made interior black had enough of that biege will try and finish up funny car cage/and dash bar this weekend some day [if it dosnt get sold first],i might have an engine to use all these bars :beer bob
There is quite a selection out there(as you probably already know), heck you could even go with a 1000 HP 350 SBB if you wanted to. :TU: :bglasses:
im a big block guy ,but my son wants a twin turbo small block, :Brow: but right now i have a pump gas 604 that should put it into the 9,s :3gears: bob
Thats awesome! Whats the car being built for? Thats one of the looks I want to go for, (big slicks on steel wheels), but what really peaks my interest is that under car reenforcement. I wanted to do some of that to my car (slightly weak frame - repairable, but I'd like to beef it while its on a rack).
not being built for anything specific,but while im building might as well make it a saleble thing,it will fit numerous classes,i.e.radial tire, ,stock suspended and it will be a 25-5 " street car" bring yours down well set it up :laugh: bob
hah! I didnt even notice you were in NY. How much to weld in a patch on a frame and do some simpler bracing? :Brow:
ITs ok, I'd never expect you to give me a quote over the internet without seeing it, I was just joking
Buick motor thats funny,i couldnt even afford to say 604 buick motor :grin: i was going to do a Buick engine but the guy in texas wanted 18,+++. for a 572, :jd: sorry for that much ill put a chevy in[ ] and have lots of change. :3gears: bob let the flame begin :Brow:
No flames here Bob! I say take YOUR car and put what YOU want in it! Im all for a person that does it his own way. Have a Ford 9'' waiting to go into mine. Wanna know why? Cause I can............. :Brow: Looking Good and keep thats pictures rolling!
I agree! More photos! I dont care what goes in it since it seems its going to be an all out drag car... I'm a fan of big power in those cars, and since cost is of a concern and you've already got that 604, who can blame you? I know if I had a running engine and was building a race car, on my budget, I'd put the running engine in it and go 16's if I had to, just to drive it.
its not an all out drag car it is a real street car,with horn, lights,backup lights,wipers, and it will get one of those small heaters,as i do drive my cars when its cold,it even has a key buzzer,i just build my cars for addvertizing :laugh: the engne is a 9.5-1 comp 604 bbc,its in one of my other cars [70 monte] which also has power windows,bench seat and anything else a streetcar has, but is about 4-500lbs heavier than the buick,and the monte,s been 124mph already shifting at 5600,and trappin 5800,[3.73,s in it] and actually after those picts were taken i made the side bar,s swing bars, :beer :Brow: bob