Fresh heads were done by Nick Servo's guy. 3 angle valve job, new bronze guides. 1.8 Spring height 110lbs on seat. they were milled .040 . they are 71cc. Were on my motor originally and made 448hp 523trq on a .030 9.98.1 BBB with 288/92H cam. Heads were re done to above listed specs ran car around block couple times and descided to tare down motor because rings were bad and go aluminum heads. Note on one pic the front boss on passenger side header bolt hole has crack but it has a heli coil in it and i never had a problem with it. Over $300 in machine work. selling for $225 plus shipping if needed. Mike http://i349.photobucket.com/albums/q361/kick71/100_0125.jpg http://i349.photobucket.com/albums/q361/kick71/100_0126.jpg http://i349.photobucket.com/albums/q361/kick71/100_0128.jpg http://i349.photobucket.com/albums/q361/kick71/100_0129.jpg http://i349.photobucket.com/albums/q361/kick71/100_0130.jpg http://i349.photobucket.com/albums/q361/kick71/100_0132.jpg
OK Herb. I can't make that event i already had plans for GM carlise. I am not going to Ohio are you? If you are I can see if I can get someone to bring them out. Or if you are coming down to Englishtown or Atco or Cecil? Mike
Heads have a cleaned up 3 angle valve job , new p/c seals on the Exhaust & umbrella on Intake. Cleaned, Spring checked & reinstalled . Also To note Mike the have had some type of port match work NOT done by our Shop ... Nick
Mike , If Herb is going to the BPG event, bring them back to the shop . I will take them with me Nick
Mike , You are welcome to go with us we have got room . You can ride in the truck with me & Stage2 Frank . Besides I am sure we could use another driver . Taking the 1969 Stage 1 convert & the 1970 Stage1 coupe Nick
Thanks for the offers guys, I am trying to wrap up a back up engine so I might just have these shipped depending on the price. If not I will see you all at bpg. Thanks Herb