I will be at the swap meet on Friday and in the pits on Thursday and Saturday. Here is a listing of items that I will bring; 70-72 Sportwagon mouldings, gas door guard, L & R tail lights, fuel tank meter 7043240 Qjet core $50 TH400 front and center emergency brake cables with hooks $100 TH400 yoke for 1350 ujoint $75 BBB left exhaust manifold with heat shield $20 BBB 2” Stage I coated headers with two pairs of collectors and extensions (I advertised them on the board earlier this year.) $850 2 sets Collector Tethers 20” tethers with clamps $80 each Mr. Gasket 651 header gasket set $20 Various BBB header gaskets 1) 1236030 455 steel head gasket $20 1237849 BBB Victor head gaskets $20 pair SCE 271176 BBB valve cover gasket set $40 1 set TRW BBB rocker arms on chrome shafts $200 1 set BBB 3/8” adjustable pushrods $125 BBB distributor with magnetic pickup, MSD connector, TA bronze gear, locked advance, cap, and rotor $100 2) BBB dipstick tubes $20 each 1) BBB dipstick and tube $40 Non-ac aluminum alternator bracket $70 2) 71-72 bucket seat backs $10 each Motive Gear 12 bolt 4.30 gear set $100 Front in-dash dual speaker mount bracket (replaces single front speaker) $20 Rule Industries V33R 3300 lb. winch $100 6 pack Royal Purple 5W30 Racing Oil $95 California Car Duster with pouch (new) $12 Pittsburgh 1.5 ton aluminum low profile floor jack NIB $60 2) Kenne-Bell medium tee shirts $10 each 1) Kenne-Bell medium TH400 tee shirt $10 I am bringing other stuff as well, plus some performance parts!
I also have some items that I could bring, if anyone wants them; 70-72 Sportwagon rear bumper, brackets, and hitch $50 70-72 Sportwagon tinted glass (no windshield) $50 70-72 GS coupe rear seat (black) $25 2) pairs aluminum front drums with hubs $150/pair 1) TH400 short shaft core $65 Logitech Formula Force (force feedback) computer gaming steering wheel with pedals (in box) $100 Plus three items that would need to be picked up at my home; 70-72 Sportwagon frame $300 70 Skylark or Sportwagon hood $30 71-72 Skylark hood with Harwood 3166 fiberglass scoop and Harwood plug $350 I live one hour north of Bowling Green. Or 10-15 minutes off of I65 near Elizabethtown, Kentucky. Thanks, John See you there!!!!
No, I do not. I do have nice frame brackets with the rubber inserts. They are in the truck in one of the totes. Thanks, John
Hey John!! Could you elaborate on this winch please? How old? Cable in good condition? IM sure 12V? I am sure I have a few friends in BG this week that could hook up... Rule Industries V33R 3300 lb. winch $100
It came to me installed in my enclosed trailer that I purchased in 2017. I don’t know if it was installed when the trailer was built or later. The rear door and extension are so long that my GS is totally on the incline when winching into the trailer. At this point, the winch would slow down to a crawl. I had a Superwinch 4500, so I installed it in the trailer. The cable has slight fraying with the hook and spring loaded latch. I think it is 1/4” diameter, probably 30’ long. I never ran it all the way out, so I am not sure. I loaded the truck earlier this week as I was making the list to list on the board. It was set up in the trailer with a wall mounted remote. That is included. There was a hand remote in the tool box that has the cord cut off. It also goes with it. Thanks, John
John, I burned out a 6000lb winch last year, so I am concerned about a smaller 3300lb unit.. Gunna have to pass in this. Thanks for your time! Wheelz, Tampa Bay
Thanks to all that came by to visit or purchase something!!! Merry Christmas and a Happy New Year, John