GS114 cam

Discussion in 'Small Block Tech' started by the bandit, Sep 9, 2003.

  1. the bandit

    the bandit Well-Known Member

    Is anybody using the gs114 cam? I would like to use it for my goals of low 14s to high 13s in the quarter. I welcome any advice:beer . Thank you.
     
    the bandit, Sep 9, 2003
    #1
  2. buick535

    buick535 Well-Known Member



    I have used that cam many times on 350's. I have a cutomer with a 72 convertible running 13 9's with it. Jim Burek P.A.E. ENTERPRISES
     
    buick535, Sep 10, 2003
    #2
  3. the bandit

    the bandit Well-Known Member

    Re: Re: GS114 cam

    What was the rest of the combo?
     
    the bandit, Sep 10, 2003
    #3
  4. buick535

    buick535 Well-Known Member

    Re: Re: Re: GS114 cam


    I thad forged pistons, just under 10 to 1 compression, mildly ported heads flowing right at 235 on the intake and 180 on the exhaust, poston 114 cam, s-divider intake, 750 edelbrock carb, headers .
    The engine dynoed like 356 horsepower.
    The car is a 72 gs conv with 3.42 gears and at the time had a t-350 trns with a stock converter. Jim Burek
     
    buick535, Sep 11, 2003
    #4
  5. alec296

    alec296 i need another buick

    350 with 118 cam

    i have a similar set up in my 72 convt but i have the 118 cam stock heads withjust some cleanup and hyperutectic pistons but mine doesnt run like that.any idea what the comp is on these pistons with a stock block and heads 040 gaskets? thanks andy:TU:
     
    alec296, Sep 25, 2003
    #5

Share This Page