How do you get tiny metal slivers off your magnet?

Discussion in 'Wrenchin' Secrets' started by cray1801, Nov 17, 2002.

  1. cray1801

    cray1801 Too much is just right.

    Use duct tape.
     
  2. yuk

    yuk Well-Known Member

    when i use magnets to pick up small stuff i try to cover the magnet with a plastic bag and when i am through, i turn th bag inside out to contain the stuff i picked up and discard. then there is no cleaning of debris directly on the magnet to deal with.

    :Brow:
    yuk
     
  3. BadBrad

    BadBrad Got 4-speed?

    That's a great idea - especially from a dude who looks like Bert.
     
  4. GSXMEN

    GSXMEN Got Jesus?

    :laugh: :laugh: :laugh:

    Good one!
     
  5. gotbuick

    gotbuick What, me worry?

    Are those the metal shavings on Bert's head? :confused:
     
  6. Greg Schmelzer

    Greg Schmelzer What are you looking at?!

    This is an idea that also works for other stuff that you can't pick up off the floor because you just clipped your finger nails, i.e. flat washers etc. Take a shop rag or any other rag lying around. Put it on the end of the shop vac hose and hold it about 1 inch off the floor. When the lost item is picked up, it will stop on the cloth and you can pick it off. Did this when I lost a contact a few years ago and it does work great.:TU: :Smarty:
     
  7. BadBrad

    BadBrad Got 4-speed?

    Since I already made the mistake of sucking up about 100 staples from my torn up counter-top without using Yuk's magnet condom I guess I'll have to find an even larger magnet and find a really really big magnet condom, just to avoid making the same mistake again. I figure the even bigger magnet will suck the staples clean off of the small magnet. This should work, right????:rolleyes:

    Really Yuk, thanks for providing us all with the prophylactic knowledge necessary to practice safe ferous debris removal!!!
     
    Last edited: Nov 23, 2002
  8. jbc455

    jbc455 Between cars...

    The next time you find a broken hard drive, take it apart.

    Aside from being fascinating inside, the magnets that hold the movable armature in place are some of the most powerful you'll ever find.

    John
     
  9. yuk

    yuk Well-Known Member

    that shop vac trick works great if you need to find a contact lens... cept when i did it i used a piece of womens nylons to cover the end of the hose.
     
  10. Greg Schmelzer

    Greg Schmelzer What are you looking at?!

    Great minds think alike!:shock:

    Look out, people! there are more than one of us. :shock:

    Also, Yuk, Those weren't your panty hose, were they?:jd: :Dou:
     
  11. yuk

    yuk Well-Known Member

    sorry, they weren't mine
    they were my sisters .....
     
  12. Greg Schmelzer

    Greg Schmelzer What are you looking at?!

    Got their phone number?:laugh:

    Just kidding, buddy. :TU:
     
  13. yuk

    yuk Well-Known Member

    hey greg, what kind of buick you lookin for?
    i have a 75 lesabre convertible (solid floors, trunk and front end, needs quarter and interior and new top, and motor tranny rebuild/replacement.) that i need to sell. i also have a 76 lesabre 4 door post that would be a good quarter panel and some other parts donor for the 75.
    let me know if you are interested and need more info.
     
  14. Greg Schmelzer

    Greg Schmelzer What are you looking at?!

    Yes, but...

    Yes, Yuk, I am interested, but right now, disposable income is at a minimum. Just changed jobs this summer and the budget is really tight. I will, however be starting my second job in a couple of weeks and may be able to pigeon hole enough money away, depending on the price. looking for a car for the kid. She turns 16 in the summer, so I would have a little time to work on her before the kid gets her license. Sounds like a good car. Safe and everything. Keep me in mind if you still have it in March!:TU:
     
  15. Eric Schmelzer

    Eric Schmelzer Well-Known Member

    Oh dear god help us all!!!:error:
     
  16. Dan Healey

    Dan Healey Well-Known Member

    Buy a FILTERMAG from Alan

    That way, you wil not have any to clean and you will discard them with the filter change (not to mention you will trap metal that you CANNOT SEE) .
     

Share This Page