I am looking for a turn signal switch for my 65 Cat witout a moving steering column, Does anyone know where I can get one or do they have a GM or Buick part number? Mine is shot! the lever is hanging out the side of the column, Is there a cross over Model I could use, Like a Impala or a Olds, Pontiac??? Don
Group #2.895 Part #1370139 with cornering lights and #1370140 without. Turn Signal switch; Lesabre, Wildcat, Electra, and Riviera without tilt wheel. I've never seen one like it in an Impala, but maybe same as Olds or Caddy full sized. They had cornering lights available too. :bglasses:
Different #'s Robert, What #'s do I use the one from this post or the one from the other post in Sparky's Corner? Does anyone know where I can get one? Don
This is what I need This is what I need, as you can see it is different then what I ended up with :ball: Don
Don, From your photos, it looks like the top pieces of both switches are the same. That's the piece that is preventing your signals from canceling, right?. If they are the same, then you might be able to swap out that broken one with the other. Does this make any sense? o No:
The Bottom plate Robert, the switch is broken,it is hard to tell from the photo but the lever just hangs down when it is all together. You can pull the lever up and down way past the point of the canceling cam and also it will move in and out from the column. The Bottom plate is rivited to the switch. So to replace the switch it looks like I need to get the whole switch and plate and harness alltogether? I really am flying blind here because I have never worked on a steering column before o No: , I need to take a better picture. Don
