located a nice 67 Electra 4D HT parts car

Discussion in 'Cars and Parts For Sale Leads' started by Rusty Davenport, Jan 12, 2013.

  1. Rusty Davenport

    Rusty Davenport Silver Level contributor

    Anyone need anything from a nice 67 Buick Electra 4 door hardtop parts car? Car was to nice to end up at the scrap yard and won't be there long so let me know what you may need.Most of the chrome trim is nice.
     
  2. DaWildcat

    DaWildcat Platinum Level Contributor

    If it was a climate control car, there should be a small plastic grill on top of the dashpad covering a temp sensor...I just need the plastic grill. I believe it's held in place with a couple small phillips head screws.

    Devon
     
  3. Rusty Davenport

    Rusty Davenport Silver Level contributor

    I will check it out for you next weekend.The interior was pretty nice but across top of dash was covered with some carpet or material,must of had a cracked dash pad,and I never looked under the covering.
     
  4. collector

    collector collector

    Hey Rusty -- Get me the exhaust manifolds!
     
  5. Rusty Davenport

    Rusty Davenport Silver Level contributor

    It looked to have the 67 style manifolds present and I am going to try and get them.Is it just exhaust manifolds that flow better on 1967 400/430 or are heads or intakes better as well?
     
  6. vonwolf

    vonwolf Silver Level contributor

    Some of the 67 400/430 head were big port heads you can tell by the casting #
     
  7. collector

    collector collector

    That car should have a switch pitch too.
     
  8. Rusty Davenport

    Rusty Davenport Silver Level contributor

    If it has the S/P trans the kickdown switch linkage piece is already gone.
     

Share This Page