McLeod Aluminum BUICK flywheel: 67-69 400/430 and 70-76 455. This is practically NOS..Looks like it was mounted but I cannot see any wear at all! The disc area looks like it never saw a disc or pressure plate! So, because of its superior o/a condition, I'm going to call it NEW: Lightweight billet aluminum at just 13.5 LBS! Thats over 50 lbs less rotational weight than the factory steel flywheel!!! 13.250" inches overall aluminum width and 14" inches measured across the 165T ring gear. 10.5 inches of disc surface. NEARLY PERFECT CONDITION. I have scuffed up the disc surface area with scotchbrite and I do NOT believe it will need to be resurfaced and I tied to show the original factory surface wheel markings in one of the pictures...! HISTORY: I have been collecting Buick 4 speed parts since 1971. This McLeod flywheel was in protected dry storage for many years... I called McLeod in California yesterday to try to get some details and I was told this by the sales manager: McLeod stopped making this ultra rare Buick flywheel back in 2003-04 when Borg Warner bought McLeod...Borg Warner was basically Pontiac for many years and didnt feel the need to manufacture special application Buick aluminum flywheels since the demand was negligible. SO, the last PRODUCTION BUICK ALUMINUM FLYWHEEL was produced in late 2003, early 2004. This one, is one of the last "special application aluminum BUICK FLYWHEELS EVER PRODUCED according to the sales rep at McLeod. YES...McLeod will still custom manufacture an aluminum flywheel for our Buicks but at $679 price tag and 120 days delivery!!! Yikes. This one, as you see it, is available for $399 shipped to any lower 48. Additional shipping charges will apply to countries outside of the US. Wheelz, Tampa Bay
Harvey...I was originally asking $449 shipped... The ad now reads $399 shipped to Bellingham Washington. Wheelz, as far diagonally across the USA as possible, in Tampa Bay
I thought about it, but I'm going to pass. It will be a bit of overkill for the engine I'm building. Good luck with it. Harvey
ThanX Randy! I was just thinkin' about listing it on eBay...tellya what, I'll meet you part way at $375 shipped to your freezing door in Gopsort IN! :TU: Paypal me NOW before I change my mind! :Brow: Wheelz, Tampa Bay
Randy Randy.... you deal a hard bargain!!. . ... I may be a fool, but I believe this flywheel will sell for AT LEAST $375 on Ebay. THEY DONT MAKE THESE ANYMORE!!! This is a $680 aluminum flywheel for ALMOST HALF PRICE! $375 shipping included IS A DEAL!! So just throw another $35 on your offer and I will ship it by WEDNESDAY...it will be a nice Christmas present to yourseff!! :TU:
ThanX Jan! I will give Randy a reasonable timeframe to reply! YOU are next up! :TU: Wheelz, Tampa Bay
I'll split your $35.00, plus a little. $358.00 is my final offer. I told myself I'd go $350.00 but you're relentless. I don't need it, I just want it and I want it $358.00 worth. If Jan wants it more than I do, then sell it to him. If you list it on e-Bay, I'll still give you $358.00 @ the close of the auction since I'm sure it won't bring any more than that. I'll PayPal you as soon as you say YES!! The only thing holding-up this deal is you....:TU: Randy
Wheelz, I just saw your message now. I will let it go to Randy because there is some other stuff I need more. I will contact you because I think you might have some of the parts I need. I will do a swap from 350 4 speed to 455 4 speed next winter. I will shoot you a PM. Thanks for offering it to me, and if Randy passes we might could do a package deal with some other things:TU: And yes I am in Denmark, the country next to Sweden:grin: Jan
Thanx for the reply Jan! Randy... Congratulations! Now go ahead and send me all your money: PenWheelz2@ij.net and PLEASE DONT FORGET to mark the PayPal payment as "PERSONAL" and highlight "GIFT".... Wheelz, Tampa bay
I knew you'd come around sooner or later. Dennis, you have $. I even let you get your last little gouge in, but it won't happen again:beer Randy Franklin 7674 west burnett rd Gosport, IN. 47433 Thanks, and Merry Christmas to you and yours!!:TU: