As promised, better late then never...... The first pic is taken at the front side of the seat, the second one is of the backside, The third pic is an overview of the extenders , as you can see the flat steel strip has some small bends in it, this is to follow the curves of the floorpan and at the end the chair will be leaning backwards and seat height will be a bit lower in order to gain more headspace The last pic is an overview of the original carpet as you can see it covers most of it, you will only have to cut two spaces at the back to put the supports of the seat on the new bolts. Al the new bolts I have welded stuck at the underside of the strip otherwise you will not be able to put a wrench between the strip and floorpan, now you only have to undo the nuts As you can also see I have also used the original bolting points of the seat for mounting and bolting down the extenders, I hate drilling through a floorpan.....this will only gain rust and ****. If anyone wants more details just send a PM
