I am referring to the seal between the right side of the AC-heater box and the kick panel (in front of the passenger door and directly under the glove box ). I have completely stripped the Skylark down and am ready to remove the body from the frame. I have perused the titles in this section and read some of the posts. If it has been covered I have misunderstood what I have read. The old seal was so dried out and broken up that I wasn't able to get a real idea of the cross section. This seal didn't come with the gasket kit I bought. As always, this is always my "go to site". So, thanks in advance!
I think Cars has that seal. call and ask for Jeff 908-369-3666 I have 3 67s for parts right now if you need other items let me know.
Mike, thanks for the quick reply. I'll give Jeff a call. This project started w/ a very clean Skylark w/ 96000 miles and mostly garaged. I installed a 1996 Trans Am LT1 ( love that FI! ) and fitted leather and suede buckets from a 2005 Bonneville. Other than the reprogam of the PCM I did the harness and everthing else myself. It will surely smoke that one tire and the mileage is terrific. So, I might be interested in a posi unit for the third member if you have one. I do want to keep the 10 bolt it has installed. That wheelie of yours IS impressive! Some day we should get together since Leavenwoth is so close. I'd love to ride in that Skylark of yours.
Well, I gave Jeff a call. He didn't have any idea what I was talking about. He requested info I don't have. Does anyone have a part number or even a place I can look that even shows this particular part? I have spent hours scouring the we with not even a hint.............. Surely, there's somebody else out there who has replaced this part!
Well, I gave Jeff a call. He didn't have any idea what I was talking about. He requested info I don't have. Does anyone have a part number , a group number, or even a place I can look that even shows this particular part? I have spent hours scouring the web with not even a hint of this factory part.............. Surely, there's somebody else out there who has replaced this part! Would anyone have a guess as to whether it's a GM part of an AC Delco piece?
