I am putting together a new blower motor and need some advice. I have Stage 2 Street Eliminator heads ported by Gessler that flow 320 at 500 on the intake and 250 on the exhaust at 500. 2 1/8 header, TA intake, 850 DP holley, I have a Vortech YS Trim Centrifigal supercharger and the car will be a street car. 8.75 to one compression, etc. What cam specs do you guys think and remember a 600 lift cam won't due because of the street car status. I had a hemi killer cam before with an iron head and the car was a 130 mph car on pump gas. Any suggestions would be great.
Best advise would be to contact a cam supplier/manufacturer. TA Performance, Poston, Trishield Performance or PAE Enterprises would all be a good place to start. Tell them what you have and what you want to accomplish and they can steer you in the right direction. Good luck. :TU:
A custom grind would be your best bet but... A KB118 would work very well with a blower motor. Got to get rid of that overlap.
