Need dash pad clip

Discussion in 'Parts wanted' started by dentman, Jun 14, 2021.

  1. dentman

    dentman Well-Known Member

    Metal clip goes in metal dash for dash pad. Need 1 for left side of dash. For a 1971 Buick GS. Convertible.Thanks Todd 7B59F0CC-B659-47FD-9E10-42EB5E5B8F5E.jpeg
     
    dentman, Jun 14, 2021
    #1
  2. BrianTrick

    BrianTrick Brian Trick

    I have one. I just stripped a 71 last month.
     
    BrianTrick, Jun 15, 2021
    #2
  3. dentman

    dentman Well-Known Member

    I will send you my info. Thank you
     
    dentman, Jun 15, 2021
    #3
  4. BrianTrick

    BrianTrick Brian Trick

    Located and will mail tomorrow.
     
    BrianTrick, Jun 15, 2021
    #4
  5. BrianTrick

    BrianTrick Brian Trick

    Shipped
     
    BrianTrick, Jun 16, 2021
    #5
  6. CJay

    CJay Supercar owner Staff Member

    Sure it needs one? The late pads don't have a stud, but a flat blade that doesn't require a clip...just an fyi
     
    CJay, Jun 16, 2021
    #6
  7. dentman

    dentman Well-Known Member

    There is one on the right side of the dash . Here is a picture. 419C450D-DBB3-4604-BAEA-18491E4907B4.jpeg
     
    dentman, Jun 16, 2021
    #7
  8. dentman

    dentman Well-Known Member

    Thank you Brian.
     
    dentman, Jun 16, 2021
    #8
  9. CJay

    CJay Supercar owner Staff Member

    The late pads don't have a stud on the drivers side
     
    CJay, Jun 16, 2021
    #9
    ToddsGS likes this.
  10. BrianTrick

    BrianTrick Brian Trick

    Correct,they have a spade,but the last two 71-72 cars I parted still had a clip in that hole. Not sure if they were installed for good measure or what.
     
    BrianTrick, Jun 16, 2021
    #10

Share This Page