I ordered a set from Ames Performance that they had listed for 70-78 cars and they are not correct. They are too big to fit in the factory brackets. Does are anybody know where I can buy the correct rubber bushings for the brackets that bolt to the frame for a 1 1/8 bar. Thanks
You need the brkts and bushings. Go to Autozone and get them. You can NOT use your stock brackets with bigger bushings.
But the ones I am replacing have the factory brackets? I thought I could just get the replacement ones for a certain year car? Thanks
You need a set of brackets AND bushings for a 1 1/8 inch sway bar. No such thing as a "thin" set of bushings to go into the factory brackets. If I'm not mistaken, 1 1/8 inch sway bar was used on camaro and firebird. T/A and Z-28 used 1 1/4. Sorry I cant be more spacific, but that's just going from memmory. Good luck!
http://www.energysuspension.com/pages/swaybbct.html Which car is this for Ed? The '64? Moog part # 8204 sway bar bushings.
Not to be a pain but I am trying to replace these rubber bushings. The rubber bushings have a number 5587 on them. I check 78-79 Trans Am and they were to thick to fit in without cutting some of the rubber. If I can not find the correct rubber ones I guess I will have to go the after market route. Heres a pic.