Norwalk-Bringing Parts to Sell

-68 GS400 Hood scoop. Some pitting on chrome. Strait. All studs intact. $50
-BBB 5-Blade Radiator Fan. $25
-GS350 Rear Deck Badge. Perfect. Needs painting. $30 SOLD.
-68 Skylark Tail light housings. 2 available. $20 each.
-400 stock intake manifold. B1383448-1. $40
-68 Skylark Driver's door. Includes Vent Window frame. Strait- no rust. $75. SOLD
-68 GS Trunk molding trim (the 2 pieces that clip to the trunk lid) $20 SOLD
-68 Skylark Windshield Base -wide stainless molding. $40
-68 GS400 Hood. Straight, no dings. One very small rust hole next to trim mounting hole. Otherwise perfect. Beadblasted and primed w/epoxy primer. Ready to paint. $100.
-68 Skylark Convertible Top Frame. Complete. Front bow solid. $100
-Skylark Convertible top motor and lift cylinders w/lines. $75
-68 Skylark Rear Fender skirts. $40.
-68/69 Skylark Front, Left Inner Fender. Perfect. No rust. $75
-Skylark Convertible top rear plastic rain gutter. Intact. $50
-Skylark Convertible top boot channel- attaches to rear of back seat. 2 available. $10 each. BOTH SOLD.

I can take pictures of an item if you are interested.
Will deliver to Norwalk next weekend.

 

Interested in, Trunk moulding / Tail light Housings & Trunk Badge !
Could you ship ?

 

Also, Hood scoop & Inner Fender ! Do you have, the 2 chrome strips & for the Scoop ? All & Pending Pics.

Thanks, Jeff

 

Interested in the door pending some pics.

 

Jeff- I'll check on the chrome strips- not sure if I have them.
Pics coming.
I can ship any of the items.

 

Door pics coming.

 

Jeff- here's the pics. The inner fender is solid and rust free- nicest I've seen. Just some overspray on it. The GS350 badge is very nice- no pitting at all. The taillight housings are dirty, but will clean up very nicely. Lenses have cracks- you'll need new ones. The trunk trim strips are very nice- I almost used them on my 68 restoration. The hood scoop has some pitting, but would be a great core for re-chrome- it's strait and all the studs are intact.
I can ship everything. The inner fender would go Greyhound- that's the cheapest way. I'll figure up the shipping costs when you decide on purchasing. I don't have the hood trim strips. Sorry. Thanks. Randy

 

Todd- the door is very nice- no rust at all. The paint is flaking off the outside, but the door is straight and solid. The front lower corner is bent a little, but will straighten out no problem. Very nice door. Came from a Texas car.
Are you going to Norwalk?
Randy

 

Randy
Put the best top boot channel asside for me I will give you a call.Tony

 

Tony- you got it.
Hope to see you next weekend. Randy

 

interseted in a boot channel.

 

Yes Randy we will be there at least for Friday. I will take the door.

 

Carl- here's a couple pics of the channel I have left. I beadblasted the ends. One end has the back split from the channel for the first inch. The rest of the channel is solid and rust-free. It could be repaired. I'll leave it up to you.
Randy

 

ttt

 

Randy,

Are you going to be there fairly early on friday? Pretty sure I will take it if it is the same as a 70-72.

 

Carl-
I honestly don't know if they are the same. I'm sure someone on the board will know! I'll be there before 10 on Friday. I'll PM you with my cell phone number and we can get together.
Randy

 

ttt

 

Hi, Randy ! Could you give me a shipping price, for the Trunk badge & 2 Chrome strips....to 15458 Passing on, the Scoop & Inner fender !

:TU:, Jeff

 

Jeff- I'll figure up the shipping first thing in the morning and let you know. Do you want the tailight housings also?
Thanks.
Randy

 

Jeff-I PM'd you with the shipping info.