Hi! Many years ago I intended to install a P1-SC setup onto my 455. I bought a "complete kit" from another board member, who had it installed and running on his 455 Skylark. The kit included the supercharger, belts, brackets, idler pulley, carb hat, belts, an extra SC pulley or two, some extra SC oil, crank pulley, cone air filter, and everything supposedly required to install the kit. However after receiving the kit, I had a tough time figuring out how to install it. The best I can tell, the kit was based on a Chevy 350 kit, and I *think* the guy I bought it from had cut out a hole in his inner fender to make it work. I'm not sure if this SC has a different clock position than other P1-SC's, or why I was having such a hard time installing this, but I just couldn't seem to make it fit cleanly (probably my own lack of fabrication skills). I was hoping for a bolt-on-and-go kit but this isn't quite that. Therefore, I suggest the buyer should NOT be someone who expects a complete, ready-to-bolt-on kit, I suggest the buyer is someone who will receive a bunch of useful components, who is willing to fabricate / modify / etc. as needed to make the supercharger work & fit to their own satisfaction. If you don't want a "project" then this is not a good buy for you. Anyhow, information as follows: - Kit is located in Reading MA - Although I can ship, I prefer not to - the parts are heavy and will require a lot of packaging etc. - Condition is *unknown* - it was sold to me as a working system, and I have no reason to believe that it's not, but I cannot guarantee that everything works well. (Normally I try never to sell things this way but I have never actually used this and obviously I haven't taken the S/C apart so I just can't guarantee this works! But the S/C does spin nicely and everything else seems to be in good shape). - Because of everything I've said above, price is $500 for everything (excluding shipping). (I purchased this for $1,300 several years ago!) - If you want me to ship, I will charge $200 for the boxes, bubble wrap, UPS cost to lower 48, etc. - I suspect it will take at least three (heavy) boxes to include everything. And honestly for $200 I'm probably losing money! Shipping to non-continental US probably isn't realistic. If the buyer is in New England or NY, I don't mind driving and meeting you halfway. For the right buyer, this is a great deal - unfortunately I just don't have the time & resources to tackle installing it on my 455. -Bob
Just making sure I don't get passed over like I have 3 other times over the past couple of months..... I will deliver it to you when I'm done with it