Paring Out 73 Electra 4 Door

Discussion in 'Parts for sale' started by garyd, Oct 24, 2011.

  1. garyd

    garyd Well-Known Member

    Parting Out 73 Electra 4 Door

    ENGINE IS LOCKED UP AND CAR HAS BAD REAR window rot. imma strip it this week. imm use some parts on my other 73 but the rest is fair game. ive got a sawzall so if you need front floors or rear pass they are good.the complete drive line is available to include rear end.the front fenders have some rust under chrome but not bad. please post what u need and ill take a pic and post it. no rear emblem or hood emblem. the speedo has speed alert you can come look also car is in goldsboro nc

    paypal accepted but please do it as a gift pick up or meeting possible for parts
     
    Last edited: Oct 27, 2011
  2. copeddler68

    copeddler68 Well-Known Member

    Would be interested in exhaust manifolds if nice. Also interested in oil pan. Let me know.
    Thanks, Richard
     
  3. nt1690

    nt1690 New Member

    Would be interested in the valve covers, the plate the mounts on the drivers side head and the plastic elbow underneath the breather for the flex tube to the head
     
  4. jjaguars84

    jjaguars84 Spammer

    gary you got a radio or a clock delete on the baby? Also hows the driver and passenger side arm rests?
     
  5. MASH4551

    MASH4551 Well-Known Member

    Gary I am still interested in the drivers door the parts that open the door inside the handle I got from you works but there is something missing inside my door I need the mechanics inside that go with the handle. :pray:
     
  6. garyd

    garyd Well-Known Member

    ill gte you the latch the door panels are hit and miss some good some bad i think i may have a decent black set in my garage . ill ull the oil pan and manifolds. yesterday looking at the engine the heads look new no clock radio delete may have the clock im kinda slow as my helper is not availiable so everything must be done by my self
     
  7. garyd

    garyd Well-Known Member

    when you say plate on driver side head you mean heat shield where hose goes to air cleaner the valve covers will need repainting no plastic elbow its broken
     
  8. garyd

    garyd Well-Known Member

    the valve covers are nice they were repained at some point it looks like the heads have been reuilt at some point as tehy are painted a grey with new freeze plugs ill have it all apart by tommorow. the floor pans have a punch of pin holes so they are no good.
     

Share This Page