I may have what you need 66 posi unit with axles Hi there, I have an 8.2 bop 2.78 gears with ring pinion and like new axles. I bought it for my 65 lark, but the axles were too long by about an inch, so I believe it is for a 66 or 67. I was told that it wouldn't work on a 68 or 69, so it almost has to be for a 66 or 67. I don't know how to tell, other than I know it is an 8.2, because I pulled the parts out of the housing myself, and I was able to recognize the housing. If you tell me what to look for I will, I may be able to borrow a friends camera and send you some pics if you like. Price will be reasonable, around 200$ with the PERFECT axles, ring and pinion and the posi unit itself. I've had bad luck sending parts first, then waiting for payment. but I'll work with you if we determine that I have what you need. Let me know. Also, I would appreciate emailing to my regular email adress and that is idigoldcars@aol.com. Thanks, Mike Landes P.S. I'm desperately looking for a 2-speed console and shifter for my 65 Lark. ThaksMikeLandes
I've got an Auburn Pro Series posi in the box and a Richmond 4.56:1 gear set for a late 60s BOP 10 bolt (8.2"). It's not the complete axle, just the center posi carrier and gears. I may even have an installation kit for it. None of the parts have ever been installed. I also have a TA Aluminum girdle rear end cover for the BOP 10 bolt if your interested. $180 for posi, $125 for gears, $100 for cover. 4.56:1 may be a bit racy for the street, but it could be fun, too. :Brow: PM me if your interested. Nick
