Now available 3/8" and 1/4" rubber fuel hose with correct paint markings. Patterned from original samples. Made from todays materials that meet SAE J30R7 spec. 3/8" hose says GAS followed by 2 triangles and 2 rectangles. 1/4" says "SWAN FUEL" Supplied in 20" length, each will do the line to pump underhood and tank sender to line connections at the rear. Each size is $15. Thanks
Steve Any chance to get the right size window washer hoses that fits through the existing hole on the firewall? This is the hose from the pump to the squiters. Thanks, George
Steve, How did you get the repetitive print on there? I made some vapor hoses with print and had to do it by hand.
Print was put on by hand Dave. VERY time consuming. I found examples with this printing on my late 1972 production GS made in Flint. Other plants and even Flint on other cars could have used other types/brands of hose. There is no correct answer for what your car would have had unless you can find some evidence. On my car hoses were the same front and rear.
I have some period magazine pictures somewhere. Some hoses say "Swan Gas" and others just repeat "GAS" "GAS". Even the vacuum hoses on the carb/Ditributor connections say GAS in the pictures.
Yes, the 1/4 and 5/16 EVAP hose have light blue print. These were used on cars with the charcoal can. I can make these but it is very tie consuming. I have deliverd one set of these to Ken from Minn. I owe Ken from CT a set and Tim from Canada as well. May work on them this weekend. Need a set?
got the hoses and stickers today,very nice pieces,for anyone interested i would definitly recommend daves hoses and his emmisions stickers.high quality!!!!:beers2: ...