Selling 61 special wagon and 62 coupe shell

Discussion in 'Cars for sale' started by BuickSmith, Mar 6, 2012.

  1. BuickSmith

    BuickSmith Well-Known Member

    Ok. i am going to sell my 62 buick special wagon. also have a good shell for a 62 2door coupe. good titles and ND antique plates go with. Wagon has new floors welded in. fabbed sheet metal, not factory floors. set up for 350 buick and 300super 2 speed trans. will sell with or without drivetrain. newley broke in 68 350. have pieces of the 215 blocks that will go with but need to be resleeved. front clip from coupe and running gear is on wagon. also have extra windshield. Have thought of making the wagon into a 2door. since the specials were all on the same platform, but just lost intrest. Got a 71 gs and would like to work on that instead.... $1,500.00 O.B.O for both and extra parts, without drivetrain. Or $4,000.00 for everthing with drivetrain. please give me a call 701-764-6172 In Killdeer ND. 30 mi N of Dickinson ND. Ask for Tom. Evenings preferable. Thank you. sorry for not posting pics of the coupe. will have to get them on here, or look at all the pics and the vid of the engine running on my Thomas Brown facebok page.
     

    Attached Files:

  2. Freedster

    Freedster Registered User (2002)

    How much for just the coupe shell?
     
  3. BuickSmith

    BuickSmith Well-Known Member

    Let me know what you think of $400.00 I do still have the seats for the coupe also that will go with. 100_0093.jpg 100_0095.jpg
     
  4. BuickSmith

    BuickSmith Well-Known Member

    Here are some more pics of the coupe. 100_0090.jpg 100_0091.jpg 100_0096.jpg 100_0097.jpg
     
  5. Freedster

    Freedster Registered User (2002)

    How do the front fenders look on the coupe? That's a part I'm sure I'm going to need eventually.
     
  6. BuickSmith

    BuickSmith Well-Known Member

    Freedster, the front clip is on the wagon. it will go with the wagon, sorry.
     
  7. Freedster

    Freedster Registered User (2002)

    Bummer. :)
     
  8. BuickSmith

    BuickSmith Well-Known Member

    O.K. guys. My "WIFE" of all people, came to me last night, and told me that i could not get rid of the cars. when asked why. she replied. " I want to have something that we all can go on trips with as our family IS getting BIGGER.:).:idea2::TU: So sorry for wasting anyones time, and thanks for those who have looked. Thanks again. TOM
     
  9. Freedster

    Freedster Registered User (2002)

    No problem. If the desire to sell a front passenger fender overtakes you, please keep me in mind. :)
     
  10. william.ali.kay

    william.ali.kay Needs more cowbell!

    Must be nice to have a wife that tells her gearhead husband to KEEP projects!

    :)
     
  11. urbancowboy0307

    urbancowboy0307 Silver Level contributor

    :gp::TU: Now go buy that understanding wife a bouqet of Flowers!
     
  12. BuickSmith

    BuickSmith Well-Known Member

    Will do. i will look at the one that came off the wagon, but i think that the pass. side was the worse of the two. will let you know, tomorow after i look at it in the light.
     
  13. gsjohnny1

    gsjohnny1 Well-Known Member

    do you have an oil pump cover off the 215's? i need it for the dragster.
     
  14. BuickSmith

    BuickSmith Well-Known Member

    GS Johney, I do have the oil pump housing, let me know if ou still whant it. where are you at so i can figure mailing cost. The face is a little scored, but if you put a plate on it, i think it would be fine.
     
  15. BuickSmith

    BuickSmith Well-Known Member

    Freedster here are some pics of the original front clip from the wagon, i would sell it with the coupe if you could use it. or $100.00 for just the clip if you come and get it. Hood is bad, did not even take pics of it. 010.jpg 011.jpg 012.jpg 013.jpg 014.jpg 015.jpg 016.jpg
     
  16. BuickSmith

    BuickSmith Well-Known Member

    GS johny1, Will be sending the pump housing out today. Mon the 12th. hope its the one you are looking for, seems to be.
     

Share This Page