SOLD: 1969 stage 1 convertible

Discussion in 'Cars for sale' started by bamboo72, Apr 12, 2020.

  1. bamboo72

    bamboo72 Well-Known Member

    20200412_173951.jpg 20200412_173951.jpg 20200412_173951.jpg
     

    Attached Files:

  2. George D.

    George D. Platinum Level Contributor

    If you want to text any other pictures to me, I can post them for you. LMK.
     
  3. bamboo72

    bamboo72 Well-Known Member

    Greatly appreciated, I have few more, # please, and will text during work break, thank you!
     
  4. George D.

    George D. Platinum Level Contributor

    Sent you a PM
     
  5. George D.

    George D. Platinum Level Contributor

  6. George D.

    George D. Platinum Level Contributor

  7. George D.

    George D. Platinum Level Contributor

  8. George D.

    George D. Platinum Level Contributor

  9. George D.

    George D. Platinum Level Contributor

    From Bamboo:

    Engine has the correct RS (1969 Stage 1) engine code, however, is a different VIN. I found it odd that the VIN on the engine is 1628**, this cars VIN is 1971**. About 34,000 numbers off.

    Trans is the correct 69 BB (1969 Stage 1) with matching VIN stamp to this car.

    Distributor is the correct 1111962 (1969 Stage 1)

    The carb is from a 1968 GS 400

    Owner purchased the car around 1973. It was painted red at (or around) that time. I asked about paperwork and there is none.
     
  10. bamboo72

    bamboo72 Well-Known Member

    Thanks George, appreciate you helping out.
     
  11. cjp69

    cjp69 Gold Level Contributor

    Do you have any pictures of the lower fenders, doors and quarter panels you can share with us?
     
  12. George D.

    George D. Platinum Level Contributor

    OOOOOOOOH! The stage 1 carb I have is coded correct for this car!!! LOL
     
    bamboo72 likes this.
  13. cjp69

    cjp69 Gold Level Contributor

    Is that a Stage 1 sticker on shroud? Close up photo available?
     
  14. bamboo72

    bamboo72 Well-Known Member

    I am sorry, but the pictures posted is all I have. The left fender will need lower patch, right fender will need lower patch and inner brace. Doors are good with some bubbling, good skin seams, qtrs will both need outer inner wheel wells and qrt wheel opening patch panels.
     
  15. goldx

    goldx Well-Known Member

    Off subject but this car is the twin to mine C28575EA-CA31-4609-A689-CC6F985F57B9.jpeg
     

    Attached Files:

    bamboo72 likes this.

Share This Page