i was just wondering where i can buy the new gear and new holder from. any hlep would be apprciated. th400 ba
If you want an original aluminum unit, go with GM. TCI's are very inexpensive, but they are made of plastic. I use TCI's, but I've broken two removing them from the tranny housing. I also use TCI for drive and driven gears.
Good info Rick :TU: I was unaware that the sleeves were plastic. Much better to go with GM ones. Don't know which sleeve he needs, but the one that takes the 40-45 tooth gears is GM part # 1362293. www.gmpartsdirect.com lists it for 25.99, but they have a hefty shipping/handling charge. I would check my local GM dealer.
so at tci they dont have a part number for the gear i am going to need (44 tooth). so should i just go through gm completly for every thing
original GM always the best. I got some new gears last year from GM and they came two to a box and were dirt cheap.
Hey guys I went to my local tranny repair shop and they had a box of good used ones, I found the one I needed and paid only $5.00 for it! Check your locals out! Good luck. Tim