Hello Everybody, OK, when I re-did the front end I replaced the complete lower A-Frames. They were very tight going in, I did not lube them as I had heard stories about lube destroying the rubber. Anyhow, I did tighten the bolts before lowering when new and after reading another post I loosened the bolts, jacked it up and let it back down. I also sprayed the bushings with RuGlyde (NAPA) which is a safe lube for rubber and drove with slightly loose bolts respraying a few times. I still have a really loud and annoying squeak from both sides up and down. Any ideas would be appreciated. Thanks, Frank