STEF's pan & 64-67 TA headers Just trial fitted a Stef's oil pan and the STG2 TA 64-67 comp. headers in my 67 A body. The pan is from PAE for use with the halo girdle. Had to notch the baffle 3/4" for the #4 cap. And the pan rail 1/4" for the mounts. Other than that it comes within 1/8" of the driver side inner tie-rod grease fitting. No big deal. The driver's side header had no clearance problems at all. 1/2" from the steering shaft, lots of clearance at the frame. The pass. side header comes within 1/2" of the frame & 1/4" from the upper control arm. The bushing are worn out though. There is 3/4" of shims at the rear . I told a few guys at Salem I would let them know how these fit and now we know. :grin:
That's great to know. My headers are sitting in the garage waiting for some other parts that will accompany them into my car...