Discussion in 'Parts wanted' started by MannyG350, Mar 21, 2020.

  1. MannyG350

    MannyG350 New Member

    Hi guys I’m looking for a working th350. I’m Located in northern Colorado, about an hour from Denver and 45 minutes to Cheyenne Wyoming. Please let me know if one is available.
    Thank you!
  2. newmexguy

    newmexguy Well-Known Member

    I know of one from a '78-'80 Regal, in the u pull it I go to, but do not know exact condition or who owned car. It's actually loose, under the car, ready to carry out. West El Paso U Pull it.
  3. Yusef Tribue

    Yusef Tribue Active Member

    I dont know what the (th) is for, but I have a ready to go Buick 350...Resealed with about a 1000 miles on it since
  4. '72 Skylark Custom 4bbl

    '72 Skylark Custom 4bbl Well-Known Member


    B.O.P. Buick, Olds, Pontiac bolt pattern. Different from Chevrolet.

  5. newmexguy

    newmexguy Well-Known Member

    '68 - '80 should work, as long as it is short tail (6 inches) and pre lock up. Not sure if there was a BOP turbo 250, it is very similar to the turbo 350, but weaker. By all means avoid the turbo 200 like the plague, it is a one piece case, smaller in outer dimension, and simply not good.

Share This Page