Does any one run slicks without tubes in then to keep down the the weight just wondering i run a 30x 9.0 tire
This is good timing for this thread, my 15x10 Weld ProStars and 28x12.50 ET Streets just came today! If I don't run tubes do I need to use some kind of sealer around the bead? Thanks, Ken
with the heavier weight o fthe cars you guys have,keep the air pressure at 12psi or more......No tubes,No screws. Coat the inside of the sidewall w/ DAWN dish soap,They'll hold air,no problems. My 10.5 x 30 Goodyears held air all winter w/o tubes. IF you want,You can also use 3M weatherstrip adhesive on the bead,But after the first pass,the tires will seat and stop moving from what I have seen.