Whats the max !

Discussion in 'The Hides' started by 67 & topless, Mar 24, 2004.

  1. 67 & topless

    67 & topless Well-Known Member

    Whats the max tire size you can put on a 15 x 7 ralley . I would like to put 275/60/15's or is that wishful thinking:Do No: pleas help before I make a mistake .


    thanx Marco
     
  2. flynbuick

    flynbuick Guest

    I have run those on that size rim and so have others here. Only on the back of course. They will clear a 70 body with ease . I do not know about a 67.
     
  3. 70 gsconvt

    70 gsconvt Silver Level contributor

    You can put a 275/60 on a 15x7 rim, but it will look slightly "bulgy". I believe the biggest "recommended" size is a 255/60R15.
     
  4. gstewart

    gstewart Well-Known Member

  5. 67 & topless

    67 & topless Well-Known Member

    Thanks guys for all your help. I'm still not sure what I want to do , right now I have 275/60/15's on the back & boy talk about a snug fit I only have an 1/8" clearace, I could cut away some of the iner quarter wheel opening but I'm not sure I want to do that.If I go whit a 255/60 I will lose 1 inc of highth and i'm sitting level right now or at least it looks that way .I can go with a 255/70/15 and I would gain 1 inc but not sure how it would look too much side wall maybe :confused: .I do know that I like the wheel well to look nice and full


    thanx marco
     
  6. 70 gsconvt

    70 gsconvt Silver Level contributor

    Only an 1/8" of clearance?? What is your backspacing. I had my 275/60R15's on 15x8's with 4.5" backspacing and I had 1" on both the inside and outside.
     
  7. 67 & topless

    67 & topless Well-Known Member

    The back spacing is 4.5 . I have a 12 bolt rearend so that makes the rims stick out a little farther then if I had the stock 10 bolt. So what do you think would you go with the 255/70 to maintain the highth or the look of the smaller side wall.

    thanx Marco
     
  8. 70 gsconvt

    70 gsconvt Silver Level contributor

    I have a corporate 8.5 10-bolt, which should be the same width as your 12-bolt.
     
  9. 67 & topless

    67 & topless Well-Known Member

    I think the difference is that mine is a 67 gs with a 68 abody rear end 64-67 are the same size and 68-72 are different I think the differance is an inch or so between the two
     

Share This Page