wireing

Discussion in 'Small Block Tech' started by 71skylark-350, Mar 5, 2003.

  1. 71skylark-350

    71skylark-350 Well-Known Member

    also my singnals quit.i think i just have blown a fews but im not sure whcih wires it is and its such a bitch to go under my dash and look at it. which ones are they.im full o questions.thanks
     
  2. Smartin

    Smartin Guest

    Sounds like you need a flasher....not a fuse. Go to auto zone and tell them you need a blinker flasher. You might as well change the hazard flasher also since you're down there. The flasher is basically the thing that makes the blinkers blink. It looks like a little cylinder made of metal. There should be 2 of them under the dash. One plugs into the fuse box, and the other is floating around near there.
     
  3. custom sky

    custom sky Generally Nice Guy

    Check all of your lights first to make sure you don't have one blown out as this will cause the turn signals to stop working.
     
  4. 72skylark

    72skylark 4 Doors of Fury!

    to be exact- if a bulb is out, the turn signals will come on, but not flash
     

Share This Page