Looking to buy a very good condition trans t400 cross member, frame isolators and frame mounts if your willing to cut them off clean. I don't want to fix anything, repair anything, add ends ect. I'm looking to take them to powder coat and bolt/weld them on if you have just one of the items please contact me. this is for a 67 boxed frame skylark. gs or convertible
I've got a crossmember. I will get pics tomorrow. I'll look to see if I have anything in the way of frame mounts. Fred
i have a mint one out of a colorado car from a 66 GS..i cant remember if they are diff..but i have used them in 67s
Mark, Is the 66GS a boxed frame. If it is, it should be the same. the open channel frame cross member is different.
yes, its off a boxed convertible frame..65-66 GS has the convert frame like 67s looks like mine is 64-66..no isolaters...shame too..its minty
i find it hard to believe that such an obscure 1 year..buick specific i believe ..convert only, cross memember is available from the parts place and its correct...is there a link? or pic you can post?
https://www.thepartsplaceinc.com/bu...Buick+Skylark/GS/Regal/GN&modelID=7&year=1967 [TABLE="width: 769"] <tbody>[TR] [TD="class: partDesc, align: center"]9788824[/TD] [TD="class: partDesc, align: center"](1964 - 1967 Skylark/GS/Regal/GN) TRANSMISSION CROSSMEMBER CONVERTIBLE NEW (44" GREEN)[/TD] [TD="class: partDesc, align: center"]$179.00[/TD] [/TR] </tbody>[/TABLE] [TABLE="width: 769"] <tbody>[TR] [/TR] [TR] [TD="class: partDesc, align: center"] AT6544Z[/TD] [TD="class: partDesc, align: center"](1964 - 1972 Skylark/GS/Regal/GN) CROSSMEMBER BRACKETS - PR[/TD] [TD="class: partDesc, align: center"]$39.00[/TD] [TD="class: partDesc, align: center"]<input name="ctl00$ContentPlaceHolder1$ModelYearSearchUserControl1$lstVwKeywordSearchResults$ctrl0$grdVwKeywordSearchResultsCategorized$ctl02$txtQuantityOrdered" type="text" value="1" id="ContentPlaceHolder1_ModelYearSearchUserControl1_lstVwKeywordSearchResults_grdVwKeywordSearchResultsCategorized_0_txtQuantityOrdered_0" style="margin: 0px; padding-right: 1px; padding-left: 1px; outline: none; width: 25px;">[/TD] [TD="align: center"]<input type="submit" name="ctl00$ContentPlaceHolder1$ModelYearSearchUserControl1$lstVwKeywordSearchResults$ctrl0$grdVwKeywordSearchResultsCategorized$ctl02$btnAddPartToOrder" value="Add" id="ContentPlaceHolder1_ModelYearSearchUserControl1_lstVwKeywordSearchResults_grdVwKeywordSearchResultsCategorized_0_btnAddPartToOrder_0" style="margin: 0px; padding-right: 1px; padding-left: 1px; outline: none;">[/TD] [/TR] [TR] [TD="class: partDesc, align: center"] AT6545Z[/TD] [TD="class: partDesc, align: center"](1964 - 1972 Skylark/GS/Regal/GN) CROSSMEMBER INSULATOR RUBBER - PR[/TD] [TD="class: partDesc, align: center"]$19.00 [/TD] [/TR] </tbody>[/TABLE]
The 67 GS400 uses the same cross member as the 64-67 GTO convertible. I put on in my car that I purchased from Ames Pontiac. I think I posted a link here last time Joe was looking for one. The one Joe posted the link for is the correct length. The Skylark and Special used a 55" wide one. 65 and 66 will work but you would need to modify the frame brackets. This is a bolt on piece dead on to the original piece. I compared the one I bought with my rotted out original and everything fit spot on. Good luck Joe. I would recommend the one from Ames only since I've had excellent service from them and there's a lot of bad transactions people here have had with TPP.
i am not a 67 guy as far as buicks. I recognize that as a 67 GTO piece..and it would make sense its repoped for GTOs..and im sure its a bolt in..good to know..i remember the days when a nice 67 GTO conv cross member brought $450 all day long.. id never buy a damn thing from the parts place ever again..its not the parts..its the service...buy it from ames..even if its a little more...after all they give us this forum..right?