Frank, any day now, you SHOULD receive the mirrors I sent you earlier in the week. PLEASE LET ME KNOW when they arrive!!! This factory 7 blade fan will definitely work with a factory fan shroud! ..and YES I believe I have a radio bracket and a decent radio besel too! WHY NOT...MAKE A LIST of other stuffs you need and I'll gather them up and ship one or two boxes to you AFTER you send me ALL YOUR MONEY!! :laugh: Wheelz, Tampa Bay
Dennis, From experience I strongly suspect I will need a few bits and pieces, once the major parts of the car is back together and we start putting the trim and details back on. Trouble is that the car and all the parts has been moved twice since it was taken apart about 3 years ago, so I need to try and sort through everything to get an idea of what I may need still. In *principle* I should have a whole car, yet there continue to be 'small' things which ends up missing. Like the whole radio setup, where I only have a hole in the dash right now. The plan is to get the engine up and running once the racing season is over for this year, then assemble the rest of the car around it. We have been concentrating on the '59 Chevy for the last few weeks, because it was a quick fix to get it up and running again (only 10 broken valve springs... :spank: :laugh: ). For the engine test I would like to have the proper 7 bladed fan, because the alternative would be to use the old 4 blade I have. That is probably not going to be enough for a 455, not even in the relatively cool Danish climate. Add to that is that I will may have to tinker with spacers and whatnot to get the fan blade to fit due to a new water pump etc. Much easier to do while we don't have all the sheet metal on the car. So right not the parts already mentioned are the ones I know I will need. I didn't ask about the fan originally, because I didn't expect to find one of these on a 350. o No: Will keep you posted on the mirrors.
FRANK...the fan blade measures around 18.5 inches. EVERYONE ELSE.... GO BACK to post #65...everything on that post is now just $65! ANY TAKERS? ,,,more stuff coming soon. Wheelz, Tampa Bay
Wheelz, I am interested in the A/C unit with all the parts listed in the picture... however is there anyway you can quote shipping to 14108? Will the compressor bracket work on a 455 motor? I am mostly interested in the A/C firewall box and evap... and compressor bracket if it fits 455 motor. THank you sir!
Sean..THANX for the inquiry. 350 and 455 a/c brackets are different. IN fact, even twixt different model years, the brackets are different..go figure. So, to be honest, these 350 a/c brackets will more-than-likely be a nightmare to make work on your 455 project. As far as the fan box, the inside half, has been damaged, BUT..NEVER FEAR....I think I have a good half to make up one good set!? I'll check and get back. (PLUS the fact that someone ahead of you, ie: WAY BACK in the list asked for the a/c box...) They would get first right of refusal once I can find a complete and GOOD set! FRANK in Denmark...lets talk about these other part you are in need of, shall we? :grin: Wheelz, Tampa Bay
Looking for the linkage that comes off the side of the steering column(near the firewall) and goes down to the side of the transmission. This is the part that works the gearshift selector, and also the neutral safety switch. I can e-mail pics if more explaining is needed.:beer
Yup...GOT ONE 4 U! Includes the linkage, tensioning spring and the plastic bushing/washer..do you need the frame bracket too? Wheelz, Tampa Bay
Hello Frank in Denmark..the radio besel and fan blade are safely packaged and ready to ship!! This package, measuring 19x19x10 weighing in at just under 14 lbs, Group '5' shipping to Viby J, Denmark is $66.50....add that to the prices I gave you for the parts and send me all your money!!! :beer Wheelz, :bglasses: Tampa Bay, Florida USA
HI. I still have a ton of good usable parts for sale. I will be listing these parts individually, soon. I beleive that with over 95 posts, most guys wont even read this thread anymore thinking all the good stuff is already sold. This is NOT TRUE. If you remember, there is nothing about this car I need, so I bought it basically to part it out for YOU guys. I knew the risk was mine, but, I have yet to earn back my initial investment, so WATCH for more stuff listed. ThanX to all those whom had purchased parts from me already!!! BTW, Dr Paul, your payment for the power steering unit arrived over the weekend..THANQ! Wheelz,Tampa Bay
IzzzY! I have the console and parts already posted in Parts for Sale! It was over a week ago so you may have to dig deep. Meanwhile, I will try to TTT the original thread for you. Wheelz, Tampa Bay
ThanX Frank! A pleasure working with you my friend! I dont see it confirmed yet but i'll go ahead and ship out these parts tomorrow morning anyway!! :beers2: :TU: Wheelz, Tampa Bay