This kit was for an engine I had built for a racecar, but have decided to go a different direction with the build. The crank will need to be turned due to some trash that went through the bearings. My machinist tells me the crank is standard on the rods and .010 on the mains so it will have to be turned to .010 on the rods and .020 on the mains. $2150.00 OBO (Negotiable due to crank issue) Price does not include shipping; parts are located in Kentucky.
George, I will find out and let you know. Mike at AM&P has the stuff so it will be the first of the week before I can check with him. Thanks.
The pistons are are T/A # 1612, rods are T/A #1632A. The compression could be as low as 10.96 with the deck at .045 and 74 cc head and as much as 14.14 with a .010 deck and a 58 cc head.
Forgot to mention if anyone is having Mike at AM&P building them an engine, the parts are at his shop so you could save on the shipping. :Brow:
I call will call him today . I tried a few times in the evening to contact him , I know he works late .