494 Stroker Kit (Dyno time only)

Discussion in 'Parts for sale' started by Horsman, Dec 21, 2011.

Page 1 of 2
  1. Horsman

    Horsman Well-Known Member

    This kit was for an engine I had built for a racecar, but have decided to go a different direction with the build. The crank will need to be turned due to some trash that went through the bearings. My machinist tells me the crank is standard on the rods and .010 on the mains so it will have to be turned to .010 on the rods and .020 on the mains.
    $2150.00 OBO (Negotiable due to crank issue) Price does not include shipping; parts are located in Kentucky.
     

    Attached Files:

    Horsman, Dec 21, 2011
    #1
  2. Horsman

    Horsman Well-Known Member

    TTT...if price is too high, willing to negotiate.
     
    Horsman, Dec 24, 2011
    #2
  3. staged67gspwr

    staged67gspwr "The Black Widow"

    What compression with these pistons?what kind of rods are those and what pistons?
     
    staged67gspwr, Dec 25, 2011
    #3
  4. Horsman

    Horsman Well-Known Member

    George, I will find out and let you know. Mike at AM&P has the stuff so it will be the first of the week before I can check with him. Thanks.
     
    Horsman, Dec 25, 2011
    #4
  5. staged67gspwr

    staged67gspwr "The Black Widow"

    No Problem Jeff thanks and Merry Christmas!
     
    staged67gspwr, Dec 25, 2011
    #5
  6. MT BUICKNUT

    MT BUICKNUT Well-Known Member

    Jeff
    Is that a Buick crank? What rods and pistons?
    Thanks Rick
     
    MT BUICKNUT, Dec 25, 2011
    #6
  7. Horsman

    Horsman Well-Known Member

    I will let you know Rick. George above was wondering the same. Thanks for the interest.
     
    Horsman, Dec 25, 2011
    #7
  8. Horsman

    Horsman Well-Known Member

    The pistons are are T/A # 1612, rods are T/A #1632A.

    The compression could be as low as 10.96 with the deck at .045 and 74 cc head and as much as 14.14 with a .010 deck and a 58 cc head.
     
    Horsman, Dec 26, 2011
    #8
  9. Horsman

    Horsman Well-Known Member

    Forgot to mention if anyone is having Mike at AM&P building them an engine, the parts are at his shop so you could save on the shipping. :Brow:
     
    Horsman, Dec 30, 2011
    #9
  10. Horsman

    Horsman Well-Known Member

    TTT...might swap for that rare piece or peices I cannot find for my 70 GS.
     
    Horsman, Jan 4, 2012
    #10
  11. Horsman

    Horsman Well-Known Member

    TTT...negotiable.
     
    Horsman, Jan 18, 2012
    #11
  12. RACEBUICKS

    RACEBUICKS Midwest Buick Mafia

    Email me a list of items you are lOoking for ... You never know what I have we can swap for
     
    RACEBUICKS, Jan 18, 2012
    #12
  13. nickbuickgs

    nickbuickgs nickbuickgs

    Jeff,
    I am till interested . I am waiting for Mike to return from vacation

    Thanks Nick
     
    nickbuickgs, Jan 19, 2012
    #13
  14. nickbuickgs

    nickbuickgs nickbuickgs

    Jeff, Do you need a 1970 455 fan schroud ?
     
    nickbuickgs, Jan 19, 2012
    #14
  15. Horsman

    Horsman Well-Known Member

    Nick, Mike is back and yes I could use a nice 70 GS455 fan shroud.
     
    Horsman, Feb 9, 2012
    #15
  16. Dubuick

    Dubuick CMDR Racer

    put me in line also....
     
    Dubuick, Feb 10, 2012
    #16
  17. nickbuickgs

    nickbuickgs nickbuickgs

    I call will call him today . I tried a few times in the evening to contact him , I know he works late .
     
    nickbuickgs, Feb 10, 2012
    #17
  18. Horsman

    Horsman Well-Known Member

    Nick, have you spoken to Mike yet? Are you still interested?
     
    Horsman, Feb 15, 2012
    #18
  19. Horsman

    Horsman Well-Known Member

    Waiting for Nick to let me know if he is interested.
     
    Horsman, Feb 15, 2012
    #19
  20. nickbuickgs

    nickbuickgs nickbuickgs

    I did today . I am passing on . Thanks for waiting for me . I had some Q&A I needed to hammer out .
     
    nickbuickgs, Feb 15, 2012
    #20
Page 1 of 2

Share This Page