I am interested in the heater controls, cables, inside duct work and the bezel for the slider control inside the car. The wheels depending on the condition and codes.
Interested in the coolant overflow tank and tubes if I could get a closer look for gouges, cracks etc.
Complete black seat belt set with bolts & covers. Nothing torn or frayed,but a few pieces showing a little weather. Need a thorough cleaning.
I'd be interested in those fender pieces. Could use a LH emblem template piece from a 350/455 car too. I need one radio bezel but would take two to have a spare. Lmk prices (incl. rear ww mldg) & if/how warped the dash pad is.
I’ve been exchanging messages with another member about the eggshell trim. There is a considerable amount of window goop that is overlapping those,so it will be a delicate and patient removal. You can’t just pull on them.
I know bri… thanks. Please keep me updated. I have a set of black ones that I was planning to use… would rather use correct brown ones.
There were a few people that inquired about the trunk trim. I did find the trim from the last car that I parted,with all five clips and screws. This one is good with no dings,but will need to typical polish from being 50+ years old.
Wovenweb, Vinyl top trim removed. The corners are pitted,but not broke. Stainless is good,no dings or damage. All 4 slide-in studs and all 17 plastic clips intact. $50.00 for all.
