ISO a decent 68-69 350 cylinder head. Can trade a 350 4 barrel intake for it also. Thanks
Years ago I started an engine swap and pulled the factory Olds 260 out of my 75 Buick Skylark and rebuilt a Buick 350. I stopped the project for...
In N Indiana looking for a 69 400 engine. Preferably running, at least decent.
496 cubic inches (4.361 bore, 4.147” stroke=495.5) Races on 93 octane pump gas with no additives! I am selling this engine complete from carb,...
Selling my 1972 Buick 455 engine. Has been freshly rebuilt with clevite bearings, Hastings rings and Fel pro gasket set. Has factory bore size and...
Came off my 77 350 in very good condition $60+ shipping from 76065 Joel 214-284-1486
Professionally Rebuilt for my Buick 350, Ended up not using and going a different direction with my build. It’s in great condition Asking $250...
Hey everyone, I have a 1972 Skylark 350 that came stock with A/C. The A/C compressor, condenser, etc were all long gone by the time I got the...
I’ve got a buddy who just picked up a 66 gto that he got from a guy who had the engine rebuilt about 4-5 years ago but never started it. It was...
Hello V8. Let me just start this by saying I am very new to this. I am about to embark on a never before done journey by myself, by tearing down...
Let me start by saying this is a complete set up. 455 Engine intake to oil pan (center sump), 400 Trans, driveshaft, even radiator & original fan...
Hi guys, Recently I've build in a stock 45 Buick engine in a 1973 Riviera project (bought it without engine and transmission). The engine had...
Building a 430 from a '69 Wildcat. The car has been in my family its whole life. I was hoping to use the original heads but the machine shop found...
Hey fellas, i'm new here and have this for sale: http://www.ebay.com/itm/172356190771?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 Also...
Hello fellow Buick people, I've got a '65 Lark. Owned since 2000. Came with the a 300-4V. I mashed this engine until it really didn't sound good....
My name is Paul. This was my HS car and I drove it till probably 10+ years ago. It has been sitting since that time. My goal was to put this into...
Hey guys I have a 1970 buick lesabre custom 455 (what a title) anyway's im rebuilding the engine and wanted some input. I've got a 2.73 rear end...
A guy just contacted me regarding my rebuilt 455 I'm selling, saying he was good with the price and was ready to buy it on PayPal. It's pretty...
Trying to get origins of engine; on drivers rear of block has # 2550474 next to it is 5.7 Any help or insights welcomed.