1961 Buick Special Dynaflow Parts Wanted

Discussion in 'Parts wanted' started by Special1, Apr 18, 2016.

  1. Special1

    Special1 Member

    Looking for the parts below for my Dynaflow trans:

    1. Inner Range Selector Lever
    2. Parking Lock Actuator
    3. Outer Lever and Shaft
    4. Range Selector Valve

    Parts I'm looking for are in the last image. Car has a 215 V8. Thanks!

    Dynaflow 1.jpg
    Dynaflow 2.jpg
    Dynaflow 3.jpg
    Trans Parts.jpg
     
    Last edited: Apr 19, 2016
  2. Aussie V8

    Aussie V8 Well-Known Member

    Your engine is not fitted with a Dynaflow. The Specials and Skylarks with 215 engine had a Dual Path Turbine Drive automatic which is different to Dynaflow.
    The larger Nailhead V8s had them only.
     
  3. Special1

    Special1 Member

    Aussie V8: "Your engine is not fitted with a Dynaflow. The Specials and Skylarks with 215 engine had a Dual Path Turbine Drive automatic which is different to Dynaflow.
    The larger Nailhead V8s had them only."

    Aussi V8, thank you for the knowledge! Did the Dual Path Turbine Drive transmissions also say 'Dynaflow' on them? I've added some pictures to my original post showing the transmission I got with the car; it says Dynaflow on the side with a list of patents. Maybe the transmission is from another model/year?
     
  4. telriv

    telriv Founders Club Member

    Yes, for some strange reason the Dual Path had "DynaFlow" cast into the rear/top part of the trans. Don't feel bad this throws everyone off.
     
  5. Special1

    Special1 Member

    telriv: "Yes, for some strange reason the Dual Path had "DynaFlow" cast into the rear/top part of the trans. Don't feel bad this throws everyone off."

    Ah I see. So, now I'm looking for parts for my Dual Path Turbine Drive transmission. Thanks for the guidance! Now, how to change the title of the thread...
     
  6. woody1640

    woody1640 Well-Known Member

    Hey: I have a 63 skylark parts car and I'll bet all the parts you need are there. I am really busy here for a day or two. As soon as I get some free time I will go pull the parts out and report back to you.


    Keith
     
  7. Special1

    Special1 Member

    woody1640: "Hey: I have a 63 skylark parts car and I'll bet all the parts you need are there. I am really busy here for a day or two. As soon as I get some free time I will go pull the parts out and report back to you."

    Keith

    Keith,

    That would be great. Thank you!
     
  8. Aussie V8

    Aussie V8 Well-Known Member

    The "DynaFlow" casting on top ----- I did not know that. :TU:
     
  9. Special1

    Special1 Member

    UPDATE: I think John from Motor City Speed Works was able to hook me up. He found all the parts I need and they appear to be in great condition. They should be shipping out tomorrow morning. Thanks to everyone that responded so quickly to my search for parts. I'll keep you posted on the outcome!
     
  10. woody1640

    woody1640 Well-Known Member

    Well I sure am glad I did not waste my time removing these parts for nothing.


    Keith
     
  11. wacko212

    wacko212 Well-Known Member

    Special1, welcome to the site. I knew you could probably find what u needed here. Gary
     
  12. Special1

    Special1 Member

    Thanks, Gary. Lots of good info, knowledge, and experience on this site for sure. Thanks for the lead!
     
  13. StagedCat

    StagedCat Platinum Level Contributor

    Hey Special, You might want to check out this site http://skylark616263.forumotion.com/ Woody's on there as well as me
    Its all related to 61-63 Skylarks/Specials

    Good luck, Tom
     
  14. Special1

    Special1 Member

    StagedCat, thanks for the suggestion. I just explored the site quickly and I can already see I'll be spending some time on there! It's great to know these sites and have all the connections. Thanks again!
     

Share This Page