1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

1964 Special / Skylark part out

Discussion in 'Car Part-Outs' started by Dockins, Apr 28, 2021.

  1. Dockins

    Dockins Member

    I have a 1964 Skylark/Special 2 door post I am looking to part out. The rear panels and wheel arches are riddled with rust holes and damage. The drivers side door is not in the best shape either. The rest of the car seems to be in good condition including trim, grille, headlight bezels, core support, hood, trunk, dash instruments, bumpers, etc. No engine or transmission.

    In the San Diego area. Posted for part out elsewhere as well. 20210428_130318.jpg 20210427_144149.jpg 20210428_130206.jpg
     
  2. jcc

    jcc Well-Known Member

    That dash section with the radio looks like it is angled in the middle, rather than straight, so that would be from a 65 instead of a 64.
     
    philbquick likes this.
  3. Dockins

    Dockins Member

    To be honest I do not know Buicks well enough (yet) to know all the differences between years. The dash came out of a '64. Sounds odd a '65 radio would be in a '64, but not impossible. The dash section above the radio is angled. 16197933820176976284356672995495.jpg Here is a better picture. Thanks for the heads up.
     
  4. jcc

    jcc Well-Known Member

    Yes, that is definitely a 65 piece. They are very close to being interchangeable, as I have a 64 piece in my 65. I added some gauges in mine, so I wanted a 64 piece to make the gauges more readable without having to use angle rings on the gauges.

    Hopefully, your heater control bezel is angled on its right side to match.

    GLWS!
     
  5. 197064buickspec

    197064buickspec 1964 Special Post-455

    I'm looking for the front park lights lenses and housings in the front bumper.

    How much for that horseshoe shaped moldings in the pictures?
     
  6. 197064buickspec

    197064buickspec 1964 Special Post-455

    Also what kind of shape is the back bumper in?
     
  7. Dockins

    Dockins Member

    PM sent
     
  8. Lennard

    Lennard Well-Known Member

    man id love that trunklid for my 64, but shipping to Europe would kill me these days

    Good luck with parting it out
     
  9. Colonel1964

    Colonel1964 Colonel1964

    Do you have any parts left?
     
  10. Blue Wagon

    Blue Wagon Well-Known Member

    What are the seat belts like?
     

Share This Page