1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

1965 300- cheap!

Discussion in 'Parts for sale' started by Jim Weise, May 8, 2023.

  1. Jim Weise

    Jim Weise EFI/DIS 482

    Hi Guys..

    I have had this thing kicking around the shop since we took it out of the 65 skylark I did a BB upgrade to here about a decade ago.. it needs to go.

    It was a good runner, but smoked blue.. not horrible, but it was there.. the intake has been off it and it's been open (stored inside) for 8-9 years.. I would consider this a good rebuild-able core, but you can do what you want with it.. it had oil pressure and made no bad noises.

    Complete, as pictured, less carb and intake (it was the alum 4 barrel intake, so that was sold)

    If your local to central MN, come pick it up.. the cost is $100

    If you need it shipped, and we can do it via fastenal, then the cost is $400. This includes palatalizing it and shipping to most locations in that zone. We can use Fastenal for anywhere in the East Zone, but if you want me to ship it into NYC or something, it's gonna be more.. I just shipped a complete Tomahawk to FLA for less than $300 Here's the freight zones..

    https://www.fastenal.com/fast/blue-lane-freight#

    If you live in fastenal's west zone then we would have to ship it by truck, and your probably going to half to add a hundred bucks or so to the fastenal price, because it has to go with another freight company.. so the motor cost will be $100 for the engine, $125 to paletize it and deliver it to a shipping depot in the Twin Cities, and then whatever the actual shipping cost is to your destination.

    Again, this only applies if you live in the "west zone" on Fastenal's map..

    Here it is..

    100_0189.JPG

    100_0190.JPG
    100_0191.JPG
    reply to this thread to purchase this engine.

    I will not be attending this year's GS nats. If your looking to get it delivered there then your going to have to work that out..

    Thanks

    JW
     

Share This Page