1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

1967 Skylark and GS400 full quarter panels

Discussion in 'Repro Parts' started by staged67gspwr, Feb 4, 2002.

  1. staged67gspwr

    staged67gspwr "The Black Widow"

    I`d like to find out how we could see if someone could help us out into making repro full quarters for `67 GS and skylarks,but i quality set,and also a `67 GS repro Grille,how could we go about doing this?anybody know?

    Thank you
    George
    `67 GS400 (464 ci)4-Speed
    `65 Skylark
     
  2. 67GSFun

    67GSFun Johnny

    Hey George, The Parts Place inc have the exact reproduction of the 67 grille.. For what I understand they had an original NOS grille and then had it 100% correctly reproduced injection molded and then painted in the correct silver argent and black with the factory duplicate over-spray and factory crayon markings.. It comes with mounting studs but no chrome..
    Item # GH2075s


    To do your own reproduction Q-panels, is a big undertaking and very costly just for setting up the tooling, dye and molds.. (100'sK's+:dollar:)2nd question is there a big enough demand to sell them and recoup your initial investment just for the tooling,dye and material and your time... 3rd you would need a pair of NOS R&L Quarter Panels..
    See you at Bellemore..
    John I

     
    Last edited: Jun 9, 2009
  3. 1967GS340

    1967GS340 Well-Known Member

    Here's a place that use to say they will make what ever you want. They just need some kind of pattern. Might need to get some guys together to make it more worth while by splitting up the cost. But they said they would do it. I would be interested to see what sort of price they came up with for future reference.

    http://www.alfaparts.net/

    I just checked their web page and they don't make that claim any more. I'm sure this is the one. Probably like was said, the cost of doing a part is pretty high if you are not going to be doing a bunch of them.
     
  4. Gary Bohannon

    Gary Bohannon Well-Known Member

Share This Page