1. If you have recently registered with a gmail email address, you must contact me, as gmail will not forward our confirmation email to you. Contact me and jim@trishieldperformance.com to complete your registration.
    Dismiss Notice
  2. In and effort to reduce the spam on the site, several years ago I had went to a program where I manually approve each and every new registration. This approval gives you full access to the site, to pictures, and to post, among other things. To be able to enjoy the full potential of the board for you, you need to be fully registered.. and that's easy.. Just send an email to me at jim@trishieldperformance.com and I will verify your registration. This policy will remain in effect indefinitely, as it has completely eliminated the bad actors from our site, who would spam and hack it, once they gained access. Thanks JW
    Dismiss Notice
  3. The "Group Buy" for the 1967-68 Deluxe Steering wheel recasting is now officially "Open". Now is the time to start sending in the wheels. The latest date that the wheels must be received by Kochs is 31 March 2025 The cost for each wheel is $750. The only "up front cost" is your shipping the wheel. If you send in more than one wheel, each additional wheel will cost $700. Shipping and insurance to Kochs and return shipping will be extra. You will be contacted by Teresa to make payment for the wheel(s) and return shipping and insurance when your wheel(s) is complete. The shipping will be factored on your delivery address and insurance. I will be sending the contact information all of you have sent me to Teresa at Kochs. Send in your wheels, horn pad and hardware and paint color sample if applicable. Please include: First and Last Name Shipping Address Phone number email address V8Buick "Member Name" Wheel Color (SEE THE BOTTOM FOR WHEEL COLOR) Pease read the "shipping to Kochs" below. There are two addresses. One for USPS Mailing One for FedEx and UPS shipping You can use USPS/Mail, UPS or FedEx to send in your core. Use the appropriate address depending on what service you use to ship. If you use USPS/Mail ship to: Koch's P.O. Box 959 Acton, CA 93510 Attn: Teresa If you use UPS or FedEx ship to: Koch's 7650 Soledad Canyon Road Acton CA 93510 Attn: Teresa Kochs Contact: Teresa (661) 268-1341 customerservice@kochs.com Wheel Color If you wheel is Black, you can list that in your information you send in with your wheel. For colored wheels, please contact Teresa about specifics for wheel color if you do not send in a color sample to match. Please contact me if you have any questions. Thank you to everyone for your participation in making this a reality. And "Thank You" Jim Weise, for allowing and facilitating this project! Michael .................... to remove this notice, click the X in the upper RH corner of this message box
    Dismiss Notice

1969 Buick Riviera parts car

Discussion in 'Parts for sale' started by coloradomtn, May 27, 2013.

  1. enduro22

    enduro22 WOT Canada prez 4 life

    Thanks Rivman!!
     
  2. coloradomtn

    coloradomtn Active Member

    Hey guys, sorry I haven't got back to yal sooner. My grandmother had a stroke and I had to fly out of the country and every time I tried to log in to an English website the internet would crash, I apologize!

    Thanks, Ed
     
  3. SportWagonGS

    SportWagonGS Moderator

    I hope she is doing well, family first!
     
  4. 71GSX455-4SPD

    71GSX455-4SPD Nick Serwo Magic Car

    Absolutely!

    I responded to your note, Ed, about the front molding pieces.

    Kurt, are you still thinking about the rear bumper? If so, I'd like to at least get in line for that. I'm on the East Coast at 06461, so shipping is an obvious big factor. Wrapped in carpet underlayment and sent Greyhound would probably be cheapest (and probably same for Kurt too, if he's going to snag it).

    Third in line for taillight bezels, but doubt they'll ever get this far, lol.

    Thanks.
     
  5. dorcheat

    dorcheat Silver Level contributor

    Interested in two of the square seat buttons. If there are three square seat buttons, all of the better since I can keep one for a spare!

    ---------- Post added at 07:12 AM ---------- Previous post was at 07:04 AM ----------

    Also interested in the little spring holding down the car jack to the trunk pan.

    Also I need one of the 5/16 inch screws that hold down the access plate in the trunk to the top of the fuel tank. Pull up the black velvety carpet in the trunk just to the upper right of the spare tire well and you can see this plate. I lost one of these small screws while I was fixing my fuel pump.
     
  6. SportWagonGS

    SportWagonGS Moderator

    Ken,
    I'm still 90% in on the bumper, mine is straight but was drilled for a trailer hitch at some point, like everything else it's a money issue, I'm a disabled (partially) Vet and my income is thin. I'm in 100% on the tail lights and bezels for sure as they are waaay better than mine.
    Did you ever get those wheels from Gary?
     
  7. redcat

    redcat Well-Known Member

    does car have a posi? also what gear ratio is in rear axle? thanks
     
  8. 71GSX455-4SPD

    71GSX455-4SPD Nick Serwo Magic Car

    Kurt,

    It worked out great with Gary. Nick Rabi was in NC and met Gary to complete the transaction and pick the rims up. :TU: Thanks for your help! :TU:

    Those bezels look to be as good as is going to be out there- nice score!
     
  9. SportWagonGS

    SportWagonGS Moderator

    Good deal on the wheels, I'm glad they got in the hands of someone that could use them, I hated to just see them sit there and rot since they didn't fit anything he has. How badly do you need the rear bumper as I can live without it since mine would be fine after a rechrome and having the hitch holes welded up.
     
  10. 71GSX455-4SPD

    71GSX455-4SPD Nick Serwo Magic Car

    Kurt, I have a '69 Riviera with low miles that although stored inside for a few decades it must have been a bit damp. The bumper on it it perfectly straight, but the chrome isn't so perfect. It looks like the one in Colorado has really nice chrome (would want more pictures). If I put that one on my car, the one I have becomes a great core candidate. Maybe we can figure something out on getting my current one to you as a core?

    I do plan to sell the car in the not too distant future, so I don't have a lot of emotional attachment to it. I say that because if you have a car you're planning to keep, drive, and be proud of, it might make more sense for you to take Ed's bumper if it works for you without having to add the cost of new chrome.
     
  11. SportWagonGS

    SportWagonGS Moderator

    Ed's bumper will need chrome, I could see that in the pics, my plan was to use it as the core for chroming and that way my car does not sit for months without a bumper as I do drive the car
     
  12. 71GSX455-4SPD

    71GSX455-4SPD Nick Serwo Magic Car

    Hey Kurt

    That makes sense to me, especially as you drive it and it is that season! I'll keep what I have as it isn't that bad at all. :bglasses:
     
  13. ryancarparts

    ryancarparts New Member

    Does is have posi and what is the gear ratio? I am about to rebuild the diff in mine so I would be ready to buy them right away. Thanks, Ryan 915 532 3475
     
  14. redcat

    redcat Well-Known Member

    still waiting on the info for my part requests... thanks.
     
  15. coloradomtn

    coloradomtn Active Member

    Hey guys! Sorry for not replying.... I found a great 67 Riv and JUST HAD TO go and take a look at it drove 4 hours and it was worth it. Clean title but interior needs to be redone, the guy wanted $1000 for it but I'm gonna bring it down.

    Anyways, Let me get my uncle over sometime and let him take a look at this thing, because honet to god, I have no idea what I was dealing with when I bought this car... :Dou: Sorry sorry sorry for the late reply!!!

    And in my defense, I'm in summer school and have two jobs :ball: please bear with me! Also, my phone number is 303 770 6666 if you have any questions that I might be able to answer about this car. Sorry and thanks!

    P.S. I PROMISE I'll post more pictures after I disassemble the car. Thanks for all the patience! And again I'm sorry for the alte reply!!

    Sincerely, Ed

    ---------- Post added at 11:05 PM ---------- Previous post was at 11:02 PM ----------

    And also, if you can list the parts that you need, that'd be great due to my lack of knowledge about these things.
     
  16. black70buick

    black70buick Well-Known Member

    Looking for the following if no one has already requested:

    If it has a 6way power bench seat, I would like the cables, electric motor and transmission.

    Thanks,
    -Chad
     
  17. SportWagonGS

    SportWagonGS Moderator

  18. blown455

    blown455 Pit crew

    I thought he was parting out???
     
  19. 71GSX455-4SPD

    71GSX455-4SPD Nick Serwo Magic Car

    I did get the trim parts I requested (they aren't in the auction pictures). He had interest on plenty of other parts, wonder what happened? :Do No:
     
  20. SportWagonGS

    SportWagonGS Moderator

    I know he had some family issues, I'm really bummed I didn't get those tail light bezels
     

Share This Page