1970 Lesabre Windshield Help

Discussion in 'Color is everything!' started by DruRizzo, Nov 5, 2011.

  1. DruRizzo

    DruRizzo Well-Known Member

    So I am planning to tackle the :blast:rust bubbles around my windshield . I've been doing some research and can't find the information I need on re-installing the windshield.
    First off, There is no weather stripping for the 1970 lesabre windshield, just urethane adhesive. Should I find some universal weather stripping? Should I use primer or just primeless urethane? :confused:

    Any advice would help!:Smarty:

    -Dru
     
    DruRizzo, Nov 5, 2011
    #1
  2. Rusty Davenport

    Rusty Davenport Silver Level contributor

    Find a auto body shop paint/supply store and they will have everything you need and can help with advice as well. The urethane needed is #8609 3M product
     
    Rusty Davenport, Nov 5, 2011
    #2
  3. DruRizzo

    DruRizzo Well-Known Member

    Anyone know where to find original/alternative clips for the rear windshield trim?
     
    DruRizzo, Nov 12, 2011
    #3
  4. steve covington

    steve covington Well-Known Member

    NAPA carries some of the trim clips.I remember on EVIL-BAY that there were several suppliers in Florida that had replacement equivalent trim clips. Some original clips have a part number molded into them, on plastic clips. You probably have steel clips though...
     
    steve covington, Nov 24, 2011
    #4

Share This Page