Here are some more parts for sale, it has the speed warning option, light option including map, lower corners of the dash, original radio with knobs and all the A/C dash pieces too.
Sorry, I was working on a clients car yesterday and buying a parts car today for pics of the grille. Do you mean the brace the mounts on the front of the wheel and then up to the core support, like a bar? If it was the actual welded brace on the fender, it was too nice for that and selling the whole fender. I thought Carhex had a fender brace for sale in the parts section.
Front bumper bracket,full set with center piece too $80.00 rust free, include some hardware. Rear full set $75.00 with most of the hardware (middle piece not in photos but included). The dash from another 72 Skylark, can be cut were it curves for the front to save on shipping if needed. The dash repair panel was taken off the spot welds, has a couple of very minor areas of pitting that should be repaired, nothing serious and big help repairing your rusted dash area $160.00. I will be pulling the windshield on the current yellow 72 which also looks to have a nice top cowl and dash area but won't now until its cleaned. Side cowls, firewall, toe boards and torque boxes look to be in great shape, I will put some photos once I get that far.
Yes, here are some photos, rust free, only problems are the curve of the bumper corner which needs a simple weld, a bump just above that and two small screw holes by the rear wheel lip for mud flaps, all minor. Its $500.00, shipping cost will vary depending on if you want Greyhound Bus lines to handle it which would be more safe but can go with Fed Ex ground but it would need a crate to insure it, that is 40.00 extra but would be much more safe then a box. Sorry, I was trying to work on shipping while doing this, will put the passenger side photos up, same problems as this one but bump on the fender was above the side marker.
Here are some photos of the passenger side which does have the 2 screw holes from a mud flap, bumper area with a small tear in the corner and small bump behind it, tiny scrap by the side marker. Rust free.
I ship fenders FedEx ground,but I am not able to box them or wrap too much around them because they are right at the size limit. I just wrap some cardboard around the sharp edges,then wrap the whole fender in celluthane. If you want it boxed or crated,you will probably need to use Greyhound.
Putting a fender in a box will spike greyhound costs to ship as well. Far better to pad sharp edges and wrap in shrink wrap.
Brake pedal assembly is in very nice shape, you don't see them like this. The mounting bracket can be used for clutch pedals if yours is rusted. Comes with the factory nuts too, price is $75.00. Not sure on the shipping cost yet, I have one for a Chevelle I am getting ready to send out. There is also the column to firewall wall panel with original hardware, very nice shape too, price is $35.00, you will need new seal. That can be shipping in a small flat box for $7.15. I listed the core support today along with the fender wells, not too bad of shape in the parts section.
I have a customer who is heading back to the west side of Chicago towards the end of April. I sent him last year with larger freight pieces to save customers on shipping cost. He can take the 70-72 Skylark fenders I have listed here for $75.00 each, handled by one person safely and those fenders deserve that. He can also take many other parts like the cores support and front fender wells listed in the parts section here, have the full firewall with side cowls, shoulders, toe boards that will be for sale soon, rust free. That normally would be expensive to ship, with him it will be much cheaper
Dash with top cowl section, lower windshield channel had a couple of small spots of rust, rest is nice shape. Floors, toe boards, firewall with A/C opening, right side cowl were in nice shape. Upper trunk pan which is 71-72 will be for sale for $100.00. Tail panel was straight but did have some minor rust in the seal channel edge,minor. A Pillars, torque boxes and more will be taken off soon. 8.5 rear end and frame are for sale locally, since shipping is tough in me getting it ready but maybe you can arrange your own pickup. Joe 602-298-7090 Paypal glady accepted as sales.
Hi Joe! What are you asking for a 72 rear bumper complete or not? I have the brake light rubbers. No brackets needed.
Ok how much to ship to 75010? Also how much would you throw in the bumperet/ bumper guard for the rear bumper. Thank you!