2004r guys - I accidentally unplugged my lock up wire --- need your help

Discussion in 'The "Juice Box"' started by BuickGS65, Dec 16, 2007.

  1. BuickGS65

    BuickGS65 '65 Skylark/GS Enthusiast

    Hello,

    I was replacing my parking brake cable and I accidentally unplugged my lock up wire from the square 4 hole connector on the driver's side (2004r trans). (The wire was loose...)

    So, what hole does the lock up wire plug into on the square 4 hole connector? (upper left, lower left, lower right, upper right)
    My upper & lower RH side (toward the rear of the car) holes are blocked off, so there are only 2 possibilities - the upper left and the lower left holes...

    I *think* that the lock up wire it plugs into the upper left.... Am I correct?

    Thanks for your help.
     
  2. 70aqua_custom

    70aqua_custom Well-Known Member

    You are correct! Merry Christmas :beer
     
  3. BuickGS65

    BuickGS65 '65 Skylark/GS Enthusiast

    Thanks Andy
     
  4. TXGS

    TXGS Paint by numbers 70 GS 455 4spd

    Mine is located in the upper left corner.:beer
     
  5. BuickGS65

    BuickGS65 '65 Skylark/GS Enthusiast

    Thanks guys... Lock up switch is working again
     

Share This Page