I picked up some 350 short blocks and parts .the first block has been run but the bearings look great,there appears to be some performance mods done,it has a rear oil pressure gauge hook up from lifter galley,extra holes drilled in the drivers side lifter galley ,then plugs, to oil the mains from the driver side galley in addition to the passenger side,the crank is .010" ,rods have aftermarket cap bolts,.030" over pistons. Heads shown have had some minor work done to them. The second block is a stock rebuild,never run, new .030"over pistons,.020" crank,I removed a couple bearings to verify,new cam bearings,plus all the extra parts shown and oil pan,rocker covers,rocker arms,pushrods,springs etc. $525. for everything would prefer local pickup but can bring to Norwalk gary