350 Parts wanted

Discussion in 'Parts wanted' started by Badd1, Apr 23, 2021.

  1. Badd1

    Badd1 New Member

    Hey y'all! Im working on a project 1968 350 and I am in dying need of parts. Im missing an Oil pan, oil pickup, all gaskets, rocker arm assembly, external oil pump, and oil pump housing. I've been searching the web for a while and have only come across old listings and out of stock items. If you have used parts, new parts, or know where I can get new or used parts that would be delightful to know. Regards Baddi
     
  2. Rocket Racer

    Rocket Racer Well-Known Member

    Where are you located? I have some new parts for a stock rebuild. Thanks, Bob.
     
    Badd1 likes this.
  3. sean Buick 76

    sean Buick 76 Buick Nut Staff Member

    I have everything you need but I’m up in Canada so I will see if someone closer can help first before I get the parts together for you.
     
    Badd1 likes this.
  4. BrunoD

    BrunoD Looking for Fast Eddie

    I can help you with all the parts you need,with a few NOS.I have the oil pan,rockers arms with shafts,etc etc .Bruno.
     
    Badd1 likes this.
  5. Badd1

    Badd1 New Member

    Thank you all for your quick and helpful responses! It would have been smart of me to write down that I am over here in Iceland. :p I had the shipping cost in mind and now it's just to see who is brave enough to go through this hassle. Regards Baddi
     
  6. sean Buick 76

    sean Buick 76 Buick Nut Staff Member

    I am fully willing to help with shipping the parts to you, no issue there. I will be busy with work the next 10 days and then I can get things together for you. If someone else can gather and pack the parts sooner of for less $ go for it. I also don’t mind if I don’t sell the parts as I’m a hoarder lol. But I dont mind helping
     
  7. Badd1

    Badd1 New Member

    upload_2021-4-23_22-13-28.png
    Don't know if this helps but this is what I got from the casting numbers
     
  8. sean Buick 76

    sean Buick 76 Buick Nut Staff Member

    Which block casting number do you have? I see two above
     
  9. Badd1

    Badd1 New Member

    The one above. Sorry
     
  10. sean Buick 76

    sean Buick 76 Buick Nut Staff Member

    So the oiling system from the 68-69 allows the oil to go up through the block into the heads and too the rockers. The 70-80 style oils the rockers through hills pushrods. I will dig into my stash next week abs let you know what I have for 68-69 rockers. The other parts I have on the shelf for sure. And if bruno or another person can help that’s cool too.
     

Share This Page